Operation Manual

23
like below picture. Password can be input by remote button if it’s composed of numbers. Or
mouse or keyboard need to be used if the password is string.
10.4.2 Configure Ethernet Connection
Gigabit Ethernet can be also used to connect wired network. Connect the network cable at
the Ethernet network port at rear side of the unit.
1) Select <Settings Browser>  <Network>  <Ethernet connection>.
2) If the configuration is “Auto IP”, the network connection will occur immediately.
3) Otherwise, network setting should be manually configured by selecting <Ethernet
Settings>.
 To maximize the performance of wireless connection, 802.11n mode
is recommended. 1080p MKV movie or HD broadcasting stream can
be streamed without stuttering. Wireless AP should be configured like
below.
 Mode  11n Only
 Encryption  WPA/2PSK