Operation Manual
Table Of Contents
- 1 Safety Notice
- 2 Features
- 3 Specifications
- 4 Description of Each Part
- 5 Package Contents
- 6 Installation and Connection
- 7 Initial Setup
- 8 Home Screen (Android Theme)
- 9 Using Remote Controller
- 10 Firmware Update & Installation of Apps
- 11 Initial Screen
- 12 Start-Up and Terminate
- 13 Watching Movie
- 13.1 Movie Browser
- 13.2 Control Widget at Browser Screen
- 13.3 Selecting Device
- 13.4 Movie Browser Menu
- 13.5 To Add Movie Poster
- 13.6 Synopsis Screen
- 13.7 Resume and Bookmark
- 13.8 Movie Playback Menu
- 13.9 Playback Speed Control
- 13.10 Searching Menu (Time, Chapter, Bookmark)
- 13.11 Playback Information Menu
- 13.12 Subtitle Menu
- 13.13 Audio Menu
- 13.14 Video Parameter Menu
- 13.15 Playback 3D Format Movies
- 13.16 Skip Playback Position
- 13.17 Movie Playback Controller
- 14 Listening Music
- 15 Watching Photo
- 16 Posters, Album Art and Photo Arrangements
- 17 Using File Browser
- 18 Connecting Internet
- 19 Install and Execute Application
- 20 Settings
- 21 Connecting Network Server or NAS
- 21.1 Network connection using NFS
- 21.1.1 Downloading TizzNFS Server
- 21.1.2 Executing TizzNFS Server & Configuration
- 21.1.3 Downloading other NFS Server
- 21.1.4 Executing freeNFS Server & Configuration
- 21.1.5 Connecting NFS Server at Device
- 21.2 Network Connection using Samba
- 21.2.1 Activating PC Share
- 21.2.2 Connecting Samba Server at Device
- 21.3 Accessing Network Drive at File/ Media Browser
- 21.4 File Copy Example from PC to Network Drive
- 22 Using DLNA
- 23 Firmware Upgrade
- 24 How to Fix Booting Failure
- 25 GNU General Public License
26
11.3.2 Configure Ethernet Connection
Gigabit Ethernet can be also used to connect wired network. Connect the network cable at
the Ethernet network port at rear side of the unit.
1) Select <Settings Browser> <Network> <Ethernet connection>.
2) If the configuration is “Auto IP”, the network connection will occur immediately.
3) Otherwise, network setting should be manually configured by selecting <Ethernet
Settings>.
11.3.3 Configure Manual-IP Ethernet
To configure the manual-IP, select “Manual IP” like following picture then select “Next”
button.
The following dialog box will appear. Enter the each digit by pressing number buttons on
remote controller. Or you can use the mouse to enter the number. The virtual keyboard will
appear if you click the field to enter.