Owner's Manual
7.
REC OUT:
You
can record from the Model One BT radio by connecting a cassette deck's audio
input (or other recording device)
to
this fixed level stereo output.
You
can also use the Model
One BT radio as a high performance analog tuner by connecting it
to
the audio input
of
a
preamplifier
or
integrated amplifier. The primary speaker will
not
be muted when using this
output. This jack accepts a 1/8
..
stereo male mini connector.
8.
117V: Connect the included power cord to this input. When unplugging the power cord from the
wall outlet, always grab it by the piug.
We
recommend using a powerstrip with surge protection.
When disconnecting the power cord, always grasp it firmly at the connector. Never pull on the
cord itself. Do not bundle the power cord together with the external
FM
antenna
or
any audio
cables, as this can inject noise
in
the audio path.
BLUETOOTH® OPERATION
Prior to pairing, verify your device supports 8/uetooth
2.1
+EDR A2DP and your device is not
connected
to
any other 8/uetooth product. Devices may pair differently. Below is a general guide.
1.
Turn
on the Model One BT to the Auxiliary position. This will power on the 8/uetooth.
Turn
the volume
up
about~
to start. Also turn up the volume on the source device
(the
device you
are
streaming from).
2.
Turn on the 8/uetooth wireless technology on your enabled device.
3.
Select"Tivoli 8/uetooth (Not Paired)" when it appears on your device's screen to initiate searching.
Some devices may prompt you for a PIN. If so, enter "0000". "Tivoli
8/uetooth" will change from
"Not Paired"
to
"Connected".
4.
You
will hear a ring tone from the Model One BT confirming connection and you can begin playing
your music files wirelessly. Adjust the volume level on your device.
You
should not have
to
pair
your device again.
Depending
on
your
device,
you
may
need
to
make
multiple
attempts
at
Pairing
and/or
Connecting
to
the
Model
One
BT,
but
please give
your
device
adequate
time
to
Pair
or
Connect
before
repeating
the
process.
PAIRING A BLUETOOTH® WIRELESS TECHNOLOGY ENABLED
iPhone®fiPod touch®fiPad®
1.
Turn
on the Model One BT to the Auxiliary position. This will power
on
the 8/uetooth.
Turn
the volume
up about
~ to start. Also turn up the volume on the source device (the device you
are
streaming from)
2.
Select "Settings".
3.
Select "General".
4.
Select "8/uetooth".
5.
Switch 8/uetooth "On"
to
initiate searching.
6.
Select "Tivoli 8/uetooth (Not Paired)" when it qppears on the display. If you are prompted
to
enter a PIN, enter "0000". "Tivoli 8/uetooth" will change from "Not Paired"
to
"Connected".
7.
You
will hear a ring tone from the Model One BT and you can begin playing your music files wirelessly.
Adjust the volume
level
on your device.
You
should not have to pair your
iPhone®/iPod®/iPad®
again.
The volume output level
of
music files varies. If you prefer
an
even higher output level, check the settings
in
your iPhone/iPod touch/iPad: Set the
EQ
Off, the SoundCheck Off, and the Volume limit Off.
If you encounter a problem Pairing, press the small arrow
to
the right
of
"Tivoli Bluetooth" on your
iPhone/iPod touch/iPad display and select "Forget this Device", then repeat the Pairing process.
8