Owner's Manual

7
Guide to Features (Rear panel):
1. 12VDC/800mA: This input is for use with an optional 1A fused, 12VDC adaptor, for operation in
a boat or camper. The connector must be 5.5mm/2.1mm center positive.
2. FM ANTENNA SWITCH: Switch between internal and external FM antennas. If an external
antenna is used, the switch should be in the External position. This switch has no affect on
AM reception.
3. EXTERNAL FM CONNECTION: In some cases, FM reception may be improved by sliding the
included external FM antenna over this “F” connector and setting the antenna switch to External.
For more, see the section marked Reception. When disconnecting the included FM antenna,
always firmly grasp the black connector. Never pull on the wire itself or you may damage the
antenna.
4. EXTERNAL AM CONNECTION: In some cases, AM reception may be improved by connecting
an external AM antenna (not included) to this jack, which accepts a 1/8" male stereo mini
connector. For more, see the section marked Reception.
5. HEADPHONE OUT: Connect a headset (not included) to this variable stereo output for private
listening. The headset will mute the primary speaker. The headset’s volume is adjusted using
the volume knob. This stereo output accepts a 1/8" stereo male mini connector. Avoid using
headphones at high volume levels to prevent possible hearing damage.
6. AUX IN: To hear audio from another device, such as a CD player, MP3 player, or computer,
connect said device’s audio output to this stereo input and switch the front source knob to
Aux. Switching to the Aux position does not turn on the connected device. This stereo input
accepts a 1/8" stereo male mini connector. The left and right stereo signal is summed to mono.
Note you may need to adjust the volume level differently for an auxiliary device than the level
used for radio listening.
7. REC OUT: You can record from the Model One radio by connecting a cassette deck’s audio input
(or other recording device) to this fixed level stereo output. You can also use the Model One