Owner`s manual

8
Remote Control:
Pull out the clear protective strip from the battery compartment before using.
1. MUTE: Press to mute the audio output. Press again to restore the audio.
2. DIRECT TRACK ACCESS 1-10: Press the number that corresponds to the CD track you wish
to play.
3. 10+: Press for direct track access above the number 10. For example, to enter track 14, press
the 10+ button followed by the #4 button. For tracks 20 and above, press the 10+ multiple
times. For example, for track 21, press the 10+ button two times, followed by the #1 button.
4. INTRO: Press to start playback at track 1 and audition the first 10 seconds of each track.
Press a second time to cancel Intro or press Stop.
5. VOL+/-: Repeatedly press to raise or lower the volume level. The display will show the volume
level from 0 (Mute) to 63. Although CD levels vary, we recommend level 36. These buttons also
control the volume level of headphones (not included) connected to the Model CD.
6. REPEAT: Press once to repeat the track playing. A “1” will appear in the upper right corner of
the display. Press a second time to repeat All tracks. The repeat icon will be shown in the upper
right of the display. Press a third time to cancel or press Stop.
7. SHUF (Shuffle): Press to playback the CD’s tracks in random order. The Shuffle icon will appear
in the upper right of the display. Press again to cancel Shuffle or press Stop. It is possible some
tracks might repeat during shuffle play.
8. Battery: Replace the battery when the remote stops working or works intermittently. Use only
a major brand 3V Lithium battery, type CR2025. To reduce the risk of fire or injury, do not leave
a dead battery in the remote. Do not dispose of spent batteries in a fire. Dispose of a dead
battery according to your state’s/country’s regulations. Never open or tamper with a battery.
Do not attempt to recharge the battery. To replace the battery, follow the illustration on the
underside of the remote.
1
5
2
3
4
7
6
8