MSDS

ManualsBrandsTitebond ManualsPaint28 oz. Contractor Grade Subfloor Adhesive (12-Pack)

7282

Franklin Security

(614) 445-1300

Franklin International

2020 Bruck Street

Columbus OH 43207

3/30/2012.

Material Safety Data Sheet

Address

Product code

Date of revision

Print date

In case of emergency

1. Product and company identification

Titebond Contractor Grade Solvent Free Subfloor Adhesive

Solvent Free

3/2/2012.

CAS #

mixture

Contact person

Franklin Technical Services

Telephone

(800) 877-4583

Reference number

3635

Chemtrec (24 Hour)

(800) 424 - 9300

Chemtrec International

(703) 527 - 3887

Product use

Adhesive

Dermal contact. Eye contact. Inhalation. Ingestion.

Signal word

2. Hazards identification

Routes of entry

Potential acute health effects

Slightly irritating to the respiratory system. Inhalation of oil mist or vapors at elevated

temperatures may cause respiratory irritation.

Slightly irritating to the eyes. This product may irritate eyes upon contact.

Harmful if swallowed.

Slightly irritating to the skin. Prolonged or repeated contact can defat the skin and lead to

irritation, cracking and/or dermatitis.

Eyes

Skin

Inhalation

Ingestion

Physical state

Liquid. [Paste.]

CAUTION!

MAY BE HARMFUL IF SWALLOWED. MAY CAUSE RESPIRATORY TRACT, EYE

AND SKIN IRRITATION.

Odor

Characteristic.

OSHA/HCS status

While this material is not considered hazardous by the OSHA Hazard Communication

Standard (29 CFR 1910.1200), this MSDS contains valuable information critical to the

safe handling and proper use of the product. This MSDS should be retained and

available for employees and other users of this product.

Potential chronic health effects

Chronic effects

No known significant effects or critical hazards.

Color

Off-white.

Emergency overview

Hazard statements

Precautionary measures

Do not ingest. Avoid breathing vapor or mist. Use only with adequate ventilation. Avoid

contact with eyes, skin and clothing. Keep container tightly closed. Wash thoroughly

after handling.

1/12

7282

3/30/2012.

Summary of content (12 pages)

PAGE 1
Material Safety Data Sheet Titebond Contractor Grade Solvent Free Subfloor Adhesive 1. Product and company identification CAS # Address Contact person Telephone In case of emergency Reference number Product code Date of revision Print date Chemtrec (24 Hour) Chemtrec International Product use : mixture : Franklin International 2020 Bruck Street Columbus OH 43207 : Franklin Technical Services : (800) 877-4583 : Franklin Security (614) 445-1300 : 3635 : 7282 : 3/2/2012. : 3/30/2012.
PAGE 2
Titebond Contractor Grade Solvent Free Subfloor Adhesive 2. Hazards identification Carcinogenicity : No known significant effects or critical hazards. 3.
PAGE 3
Titebond Contractor Grade Solvent Free Subfloor Adhesive 5. Fire-fighting measures Flammability of the product Extinguishing media Suitable Not suitable Special exposure hazards Special protective equipment for fire-fighters : In a fire or if heated, a pressure increase will occur and the container may burst. : Use an extinguishing agent suitable for the surrounding fire. : None known. : Promptly isolate the scene by removing all persons from the vicinity of the incident if there is a fire.
PAGE 4
Titebond Contractor Grade Solvent Free Subfloor Adhesive 8. Exposure controls/personal protection glycerol ACGIH TLV (United States, 2/2010). TWA: 10 mg/m³ 8 hour(s). Form: Inhalable fraction OSHA PEL 1989 (United States, 3/1989). TWA: 5 mg/m³ 8 hour(s). Form: Respirable fraction TWA: 10 mg/m³ 8 hour(s). Form: Total dust OSHA PEL (United States, 6/2010). TWA: 5 mg/m³ 8 hour(s). Form: Respirable fraction TWA: 15 mg/m³ 8 hour(s). Form: Total dust OSHA PEL 1989 (United States, 3/1989).
PAGE 5
Titebond Contractor Grade Solvent Free Subfloor Adhesive 8. Exposure controls/personal protection Respiratory : Use a properly fitted, air-purifying or air-fed respirator complying with an approved standard if a risk assessment indicates this is necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator.
PAGE 6
Titebond Contractor Grade Solvent Free Subfloor Adhesive 11. Toxicological information No known significant effects or critical hazards.
PAGE 7
Titebond Contractor Grade Solvent Free Subfloor Adhesive 11.
PAGE 8
Titebond Contractor Grade Solvent Free Subfloor Adhesive 11. Toxicological information Conclusion/Summary Skin : Prolonged or repeated contact can defat the skin and lead to irritation, cracking and/or dermatitis. : This product may irritate eyes upon contact. : Inhalation of oil mist or vapors at elevated temperatures may cause respiratory irritation. Eyes Respiratory Sensitizer No known significant effects or critical hazards.
PAGE 9
Titebond Contractor Grade Solvent Free Subfloor Adhesive 12. Ecological information Aquatic ecotoxicity Product/ingredient name Result Species glycerol Acute LC50 54 to 57 ml/L Fresh water ethanediol Acute LC50 >100000 ug/L Marine water Fish - Oncorhynchus mykiss - 0.
PAGE 10
Titebond Contractor Grade Solvent Free Subfloor Adhesive 15. Regulatory information United States HCS Classification U.S. Federal regulations : Not regulated. : TSCA 4(a) final test rules: sodium hydroxymethanesulphinate; biuret TSCA 8(a) PAIR: methyl acetate; mequinol; Nonylphenol, branched, ethoxylated TSCA 8(a) IUR Exempt/Partial exemption: Not determined Commerce control list precursor: 2-diethylaminoethanol United States inventory (TSCA 8b): All components are listed or exempted.
PAGE 11
Titebond Contractor Grade Solvent Free Subfloor Adhesive 15. Regulatory information Canadian lists Canadian NPRI : The following components are listed: Ethylene glycol CEPA Toxic substances : None of the components are listed. Canada inventory : Not determined. This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the MSDS contains all the information required by the Controlled Products Regulations.
PAGE 12
Titebond Contractor Grade Solvent Free Subfloor Adhesive 16. Other information Reprinted with permission from NFPA 704-2001, Identification of the Hazards of Materials for Emergency Response Copyright ©1997, National Fire Protection Association, Quincy, MA 02269. This reprinted material is not the complete and official position of the National Fire Protection Association, on the referenced subject which is represented only by the standard in its entirety.