Installation Instructions

PROvantage Weatherproof Subfloor Adhesive

PROvantage™ Weatherproof Subfloor Adhesive is a high-

performance, VOC-compliant formula ideal for subfloor

installations and general plywood use. It offers a strong initial

tack and excellent bond strength for particleboard,

OSB, engineered lumber and wet, frozen and treated lumber.

PROvantage Subfloor Adhesive provides a permanent bond

that remains flexible, reduces nailing and eliminates squeaky

floors. It can be easily extruded from 0°F - 100°F for

applications in various climates.

Exceeds the requirements of APA's AFG-01, ASTM D3498

and ASTM C557.

Product Features

• VOC-compliant

• Wet & frozen lumber

• Bridges gaps

• Eliminates squeaks

• Reduces nailing

• Strong, fast grab

Physical Properties

Type Proprietary synthetic polymer Calculated VOC 49 g/L

State Thixotropic medium viscosity mastic Weight/gallon 10.6 lbs.

Color Light beige Flashpoint < 0°F

Solids 67% Freeze/thaw stability Will not freeze

Viscosity 150,000 cps Storage life 18 months in tightly closed containers at 75°F

Coverage (maximum): Approximate length of bead according to bead diameter

Container 1/8” bead 1/4” bead 3/8” bead

10 oz. Cartridge 123 ft. 30 ft. 13 ft.

28 oz. Cartridge 343 ft. 86 ft. 38 ft.

PAGE 1
PROvantage Weatherproof Subfloor Adhesive PROvantage™ Weatherproof Subfloor Adhesive is a highperformance, VOC-compliant formula ideal for subfloor installations and general plywood use. It offers a strong initial tack and excellent bond strength for particleboard, OSB, engineered lumber and wet, frozen and treated lumber. PROvantage Subfloor Adhesive provides a permanent bond that remains flexible, reduces nailing and eliminates squeaky floors.
PAGE 2
Application Guidelines Application Temperature 0°F to 100°F Service Temperature Range -20°F to 120°F Method of Application Cartridge/caulking gun Working Time Approximately 20 minutes for a 1/4” bead Working Surfaces Surfaces to be bonded should be clean, dry and free from excessive oil, grease, water, dirt or any other material that may deter adhesion. Cleanup Tools/adhesive may be cleaned with acetone or mineral spirits. Follow solvent vendor’s precautions.