Specification

Important Notice: Our recommendations, if any, for the use of this pr
oduct ar
e based on tests believed to be r
eliable. Since the use of this product is beyond the control of
the manufacturer, no guarantee or warranty, expressed or implied, is made as to such use or ef
fects incidental to such use, handling or possession or the r
esults to be
obtained, whether in accordance with the directions or claimed so to be. The manufacturer expressly disclaims responsibility therefore. Furthermore, nothing contained
herein shall be construed as a recommendation to use any product in conflict with existing laws and/or patents covering any material or use.
2020 Bruck Street, Columbus, Ohio 43207
CUSTOMER SERVICE 1-800-669-4583
TECH SERVICE 1-800-347-GLUE
www.titebond.com
Application
Guidelines
Physical
Properties
(Typical)
Application temperature Above 55°F.
Open assembly time 5 minutes (70°F./50%RH)
Total assembly time 10-15 minutes (70°F./50%RH)
Minimum required spread Approximately 6 mils or 250 square feet per gallon
Required clamping pressure Enough to bring joints tightly together (generally
, 100-150 psi for
softwoods, 125-175 psi for medium woods and 175-250 psi for hardwoods)
Methods of application Plastic bottles for fine applications; glue may also be spr
ead with a roller
spr
eader or brush.
Cleanup Damp cloth while glue is wet. Scrape off and sand dried excess.
T
ype
Cr
oss-linking polyvinyl acetate
State Liquid
Color Honey cream
Dried film T
ranslucent, yellow
Solids 48%
Viscosity 4,000 cps
pH 3.0
Calculated VOC: 5.5 g/L
Weight/gallon 9.1 lbs.
Chalk temperature*
Approx. 55°F.
Flashpoint >200
°F.
Freeze/thaw stability Stable
Storage life 12 months in tightly closed containers
at 75
°F.
© 2007 Franklin International.
All rights r
eserved. (Rev. 01/07 )
Titebond
®
II
Premium Wood Glue
Units per
Packages
Cat. No.
Size
Package
Weight per Pallet
5001 1.25 oz. Bottle
50
6 160
5002 4 oz. Bottle 12 5 270
5003 8 oz. Bottle 12 8 160
5004 16 oz. Bottle
12
16
100
5005 Quart Bottle 6 16 88
5006 Gallon Jug 2 20 63
5007 5 Gallon Plastic Pail 1 51 24
5008 55 Gallon Drum 1 552 4
Ordering
Information
Limitations
Titebond II Premium Wood Glue is not for continuous submersion or for use below the waterline. Not
for structural or load bearing applications. Do not use when temperature, glue or materials are below
55°F. Freezing may not affect the function of the product but may cause it to thicken. Agitation should
restore product to original form. Because of variances in the surfaces of treated lumber, it is a good
idea to test for adhesion. Read MSDS before use. KEEP FROM FREEZING.
KEEP OUT OF THE
REACH OF CHILDREN.
Product
Features
• First one-part wood glue to pass ANSI Type II water-resistance
• Designed for exterior use
• Excellent sandability
• Unaffected by finishes
• FDA approved for indirect food contact
• Ideal for radio frequency (R-F) gluing systems
• Easy cleanup with water
*Chalk temperature indicates the lowest recommended temperature at which the glue, air and materials
can be during application, to assure a good bond.
Bond
Strength
ASTM D-905
(on hard maple)
Temperature Strength psi % wood failure
Room Temperature 3,750 72
150°F. Overnight 1,750 6