RE] rem FE FUE TETANUS DENTITION COVE BASE PLUS CONSTRUCTION ADHESIVE Dentition Cove Base Plus Adhesive is a professional-strength adhesive formulated to provide a fast, strong grab that holds materials firmly in place and eliminates sagging. The advanced formula adheres rubber and vinyl cove base to common building materials and has the added ability to bond to painted and primed surfaces.
Minimal bracing needed Impact-resistant SOC-compliant Application Guidelines Application Temperature: Over 40°F for adhesive and substrates Service Temperature Range: 0°F to 120°F Working Time: 5-10 minutes Prep: Surfaces must be clean and free of any material that may prevent adequate adhesion. Application: Cut tip on slant for 1/4” to 3/8" bead. Puncture inner seal and place in cartridge gun. Apply continuous parallel beads on the back of the cove base approximately apart.
State: Medium-viscosity mastic Color: Beige Solids: 59% Viscosity: 80,000 cps pH:70 Calculated VOC: < 50 g/L Weight Per Gallon: 11.2 Ibs. Flash point: > 200°F Freeze / Thaw Stability: Stable Storage Life: 18 months in an unopened container Limitations Dentition Cove Base Plus Adhesive is not designed for continuous submersion. When applying over paint, wallpaper, ceramic tile or other non-porous materials, "roughing up” the area by sanding or scraping will increase bond strength.
