Product Brochure

Type: Latex
Non-Reactive VOC:
Tooling time:
10-15 minutes
Weight per gallon: 10.59 lbs. (white and colors); 8.68 lbs. (clear)
Flashpoint: Solvent free/Not applicable
Freeze thaw stability: Stable through 20 cycles
Full cure: 3-7 days**
Application temperature: Above 40°F and below 120°F
Joint movement capability: 100%
Storage life: 24 months in tightly closed containers
Coverage: 10.1  oz = 31 linear ft. at a 1/4” bead
Cleanup: Soap and water
**Cure will be aected by joint size, conguration, and environmental conditions.
Titebond® DuraMaster™ is ready to use. Apply with a caulking gun.
Extrude sealant into openings and gaps of the project. Fill joint opening
to maximum capacity and repeat as necessary. If joint depth exceeds
½”, use backing material. If necessary, smooth bead immediately, with a
very light touch. Painting may occur 2-4 hours after application with a
premium grade, water-based (latex-based) paint.
Do not apply on exterior surfaces if rain is expected within 24 hours.
Air, sealant, and surface temperatures should be 40°F (4°C) and rising.
Protect from rain for 24-48 hours after application. Dry time may be
extended in humid or cold conditions. Painting may occur within 2-4
hours after application with a high-quality, water-based (latex-based)
paint. For other paint types, a compatibility test is recommended. To
ensure neat sealant lines, mask areas adjacent to joints. Always apply
sealant in a bead form. Once sealant is dry to the touch and does not
transfer, remove masking tape. If joint depth exceeds 1/2”, use backing
material. NOTE: Highly recommend using backer rod/backing material
for all joints. Not designed for continuous submersion or use below the
waterline. Store unused product in dry location at or below 70°F (21°C).
Not for use with nail holes or butt joints.
For questions, please call our Help Line at 1-800-347-4583 or visit us at
Titebond.com.
White/Colors have no cautions.
Clear: WARNING: EYE, SKIN AND RESPIRATORY IRRITANT.
Contains acrylic polymer, mineral spirits, and ethylene glycol. Harmful
if swallowed. Long term exposure to ingredients in this product can
increase the risks of certain cancers. Avoid contact with eyes skin and
clothing. Use only with adequate ventilation. Wear appropriate personal
protective equipment. First Aid: If swallowed, do not induce vomiting;
contact physician. If eye contact occurs, ush eyes with water for 15
minutes; contact physician. Wash skin contact areas with soap and
water; contact physician if irritation persists. For additional information
refer to Safety Data Sheet. KEEP OUT OF THE REACH OF CHILDREN.
WARNING: This product contains a chemical known to the State of
California to cause cancer and birth defects or other reproductive harm.
SPECIFICATIONS
Complies with the following requirements:
• ASTM C920 – Class 100/50
• ASTM C834 Type OP Grade -18°C
PHYSICAL AND CHEMICAL
CHARACTERISTICS
Type: Latex
Non-Reactive VOC:
<50 g/L (<1.5% wt.)
Tooling time: 10-15 minutes
Weight per gallon:
10.59 lbs., white and colors; 8.68 lbs. clear
Flashpoint: Solvent free/Not applicable
Freeze thaw stability: Stable through 20 cycles
Full cure: 3-7 days **
Application temperature: Above 40°F and below 120°F
Joint movement capability:
100%
Storage life: 24 months in tightly closed containers
Coverage: 10.1  oz = 31 linear ft. at a 1/4” bead
Cleanup:
APPLICATION
LIMITATIONS
CAUTION STATEMENT
Units Per Pallet
108
Units Per Package
12
UPC
037083710014
Weight
13.85 lbs
Size/Color
10.1 oz Cartridge/White
Over 10 colors available
Part Number
71001
Limited Warranty: If not satised with product performance when used as directed, return
container and proof of purchase to Franklin International, Inc. for replacement of product.
Buyer’s sole remedy shall be limited only to the replacement of product exclusive of cost of
labor. No other warranties are expressed or implied.
Paintable: After 2-4 hours
Tack-free time:
1 hour
Solids: 74%
Columbus, Ohio 43207 614.443.0241 (Technical Service 1.800.347.4583) © 2019 01393-4020GP FF1167
VISIT WWW.TITEBOND.COM FOR THE
MOST UP-TO-DATE PRODUCT INFORMATION
CAUTION STATEMENT
LIMITATIONS
APPLICATION
SPECIFICATIONS
PHYSICAL AND CHEMICAL
CHARACTERISTICS
Complies with the following requirements:
• ASTM C920, Class 100/50 (white and colors)
• ASTM C920, Class 25/25 (clear)
• ASTM C834, Type OP, Grade -18°C
<50 g/L (<1.5% wt.)
Paintable: After 2-4 hours
Tack-free time:
Solids:
74%
1 hour
high performance sealant
Limited Warranty: If not satised with product performance when used as directed,
according to our sealant installation guidelines, return container and proof of purchase to
Franklin International, Inc. for replacement of product. Buyer’s sole remedy shall be limited
only to the replacement of product exclusive of cost of labor. No other warranties are
expressed or implied.
Part Number Size/Color Weight UPC Units Per Package Units Per Pallet
1081203708332001510.59 lbs10.1 oz Cartridge/White
32001
108120370833213198.68 lbs10.1 oz Cartridge/Clear
32131
11 colors available
TM