Safety Data Sheet Titebond Quick & Thick Section 1. Identification GHS product identifier : Titebond Quick & Thick Product type : Liquid. CAS # : mixture Address Contact person : Franklin International 2020 Bruck Street Columbus OH 43207 : Franklin Technical Services Telephone : (800) 877-4583 In case of emergency Reference number : Franklin Security (614) 445-1300 : 6006 Product code : 2403 Date of revision : 11/13/2015. Print date : 11/13/2015.
Titebond Quick & Thick Section 3. Composition/information on ingredients Hazardous ingredients United States Name CAS number % Name CAS number % oxydipropyl dibenzoate 27138-31-4 1-5 No hazardous ingredient Canada Mexico Classification Name CAS number UN number % IDLH H F R Special oxydipropyl dibenzoate 27138-31-4 Not available. - 2 0 0 - 1-5 Any concentration shown as a range is to protect confidentiality or is due to batch variation.
Titebond Quick & Thick Section 4. First aid measures Notes to physician Specific treatments : Treat symptomatically. Contact poison treatment specialist immediately if large quantities have been ingested or inhaled. : No specific treatment. Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training. See toxicological information (Section 11) Section 5.
Titebond Quick & Thick Section 7. Handling and storage Precautions for safe handling Protective measures : Put on appropriate personal protective equipment (see Section 8). Advice on general occupational hygiene : Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and smoking. Remove contaminated clothing and protective equipment before entering eating areas.
Titebond Quick & Thick Section 8. Exposure controls/personal protection Eye/face protection : Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. If contact is possible, the following protection should be worn, unless the assessment indicates a higher degree of protection: safety glasses with sideshields.
Titebond Quick & Thick Section 11. Toxicological information Information on toxicological effects Information on the likely routes of exposure : Routes of entry anticipated: Oral, Inhalation. Routes of entry not anticipated: Dermal. Potential acute health effects Eye contact : No known significant effects or critical hazards. Inhalation : No known significant effects or critical hazards. Skin contact : No known significant effects or critical hazards.
Titebond Quick & Thick Section 14. Transport information DOT Classification TDG Classification Mexico Classification ADR/RID IMDG IATA UN number Not regulated. Not regulated. Not regulated. Not regulated. Not regulated. Not regulated. UN proper shipping name - - - - - - Transport hazard class(es) - - - - - Packing group - - - - - - Environmental hazards No. No. No. No. No. No.
Titebond Quick & Thick Section 15. Regulatory information New York : None of the components are listed. New Jersey : None of the components are listed. Pennsylvania : None of the components are listed. California Prop. 65 Not available. Ingredient name Cancer Reproductive No significant risk level Maximum acceptable dosage level Not applicable. Canada Canadian lists Canadian NPRI : None of the components are listed. CEPA Toxic substances : None of the components are listed.
Titebond Quick & Thick Section 16. Other information Hazardous Material Information System (U.S.A.) Health 1 Flammability 1 Physical hazards 0 Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4 representing significant hazards or risks Although HMIS® ratings are not required on SDSs under 29 CFR 1910. 1200, the preparer may choose to provide them. HMIS® ratings are to be used with a fully implemented HMIS® program.
Titebond Quick & Thick Section 16. Other information To the best of our knowledge, the information contained herein is accurate. However, neither the above-named supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the information contained herein. Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution.
