Owner's manual

Page 7;&(%$*4.8"4,7%<'*#$"&8#=%/7*,#*%4,77%>?@@@?A@B?BA>@1Item 64978
CD;6EFGDHIE6IDIJ6 KDCHJ%L6MNHIOL6MNHIO%EHPC SETUP
CS5+&7&3S
Workpiece Ground Cable
Electrode Cable
Overheat Shutdown Indicator
Cooling Fan
Housing Ground Point
Single, Dual AC or DC Power
Electrode Holder
Single Phase AC Power Supply
Frequency: 60 Hz
!DJ
Volts Alternating Current
D
Amperes
RJ!
Open Circuit Voltage
W!D
Kilovolt Amperes
(Volts / 1000 * Amperes)
DLO
American Wire Gauge
]
Duty Cycle
I
^
Conventional Welding Current
Z
^
Conventional Load Voltage
Electric Shock Hazard.
Do not touch energized parts.
Inhalation Hazard.
Keep head out of fumes and
use proper ventilation.
Read manual before
setup and/or use.
Fire Hazard.
Keep flammable materials
away during welding. Spatter
can cause accidental fires.
Arc Ray Hazard.
Wear welding helmet with
properly rated filter lens.
Pacemaker Hazard.
Welding processes may
interfere with pacemakers.
Consult doctor before use.
C/*4"2"4,$"&8#
120VDC 240VDC
Power Input at Output 21.3A @ 70A 42 A @ 225 A
Welding Current Range 15A-70A 15A –225 A
Rated Duty Cycles 40% @ 70A 20% @ 225 A
Maximum OCV 85V 85V
Weldable Materials Mild Steel, Stainless Steel, Cast Iron