Owner's manual

Page 6 @)1&/2:(+.:4=&A02'/.)+'B&6=24'2&:4==&CD###DE#$D$EC#, Item 64804 64805
FG@<HI JGKLH<LGLM<NGFKM&O<PQKLR O<PQKLR&HKSFF<HTS
R1)0+>.+9
HV&SU<-<LH&<P<MHUKM&F]VMY&GLQ&Q<GH]&&
@UVJ&KLMVUU<MH&RUVTLQKLR&OKU<&MVLL<MHKVL5&
M(2:\&*./(&4&A04=.8.2>&2=2:/1.:.4+&.8&W)0&412&.+&>)03/&4'&/)&*(2/(21&/(2&)0/=2/&.'&
61)621=W&91)0+>2>,&&&
Q)&+)/&0'2&/(2&O2=>21&.8&/(2&6)*21&:)1>&)1&6=09&.'&>4;492>,&&K8&>4;492>B&(4X2&./&1264.12>&3W&4&'21X.:2&
84:.=./W&328)12&0'2,&&K8&/(2&6=09&*.==&+)/&8./&/(2&)0/=2/B&(4X2&4&61)621&)0/=2/&.+'/4==2>&3W&4&A04=.8.2>&2=2:/1.:.4+B&
>)&+)/&0'2&4>46/21&6=09',
1. The green wire inside the cord is connected to
the grounding system in the Welder. The green
wire in the cord must be the only wire connected
to the Welder’s grounding system and must
never be attached to an electrically “live” terminal.
Never leave the grounding wire disconnected
or modify the Power Cord Plug in any way.
2. Make sure the tool is connected to an outlet having
the same configuration as the plug. If the tool must
be reconnected for use on a different type of electric
circuit, the reconnection should be made by qualified
service personnel; and after reconnection, the tool
should comply with all local codes and ordinances.
<[/2+'.)+&M)1>'
Q)&+)/&0'2&4+&2[/2+'.)+&:)1>&)+&/(.'&O2=>21,
U26=4:2;2+/&M)1>'
1. T'2&)+=W&/(2&'066=.2>&6)*21&:)1>&8)1&/(.'&
O2=>21&)1&4+&.>2+/.:4=&126=4:2;2+/&:)1>,
2. Q)&+)/&.+'/4==&4&/(.++21&)1&=)+921&
:)1>&)+&/(.'&O2=>21,
3. Q)&+)/&64/:(&:)1>'&)8&4+W&=2+9/(&
/)92/(21&8)1&/(.'&./2;,&&S4/:(2'&;4W&4==)*&
;).'/012&/)&62+2/14/2&/(2&.+'0=4/.)+B&
12'0=/.+9&.+&2=2:/1.:&'():\,