Owner's manual

Page 13@)1&/2:(+.:4=&A02'/.)+'B&6=24'2&:4==&CD###DE#$D$EC#,Item 64804 64805
FG@<HIJGKLH<LGLM< NGFKM&O<PQKLRO<PQKLR&HKSF F<HTS
20. Make sure the welding wire is resting in the groove
of the Feed Roller, then push the wire Idler Arm
down, and swing the Feed Tensioner up to latch it
across the tip of the arm.
After the wire is held by the Tensioner,
you may release it.
L)/25 The tension should be 3 – 5 for solid wire and
2 – 3 for flux-cored wire. Too much force on flux-cored
wire will crush it and may cause feeding issues.
21. Pull and twist the Nozzle to remove it.
22. Unscrew the Contact Tip
counterclockwise and remove.
23. Lay the MIG Gun Cable out in a straight line so
that the welding wire moves through it easily.
Leave the cover open, so that the feed
mechanism can be observed.
KJSVUHGLH
F/4.+=2''&'/22=&*.12&.'&=2''&8=2[.3=2&/(4+&
)/(21&*2=>.+9&*.12,&&H(2128)12B&./&.'&;)12&
>.88.:0=/&/)&822>&/(1)09(&/(2&=.+21&4+>&90+,&&
K/&.'&2'62:.4==W&.;6)1/4+/&/)&\226&/(2&90+&:43=2&
'/14.9(/&*(.=2&822>.+9&'/4.+=2''&'/22=&*.12,
OGULKLR
The following steps require applying power to the Welder
with the cover open.
H)&612X2+/&'21.)0'&.+^01W&81);&8.12&)1&2=2:/1.:&'():\5
1. Q)&+)/&/)0:(&4+W/(.+9B&2'62:.4==W&+)/&/(2&R1)0+>&M=4;6B&
*./(&/(2&R0+&)1&*2=>.+9&*.12&)1&4+&41:&*.==&32&.9+./2>,
2. Q)&+)/&/)0:(&.+/21+4=&O2=>21&:);6)+2+/'&
*(.=2&./&.'&6=0992>&.+,
24. Turn the Power Switch off and do not touch the
Gun’s Trigger and before connecting Power Cord:
a. !"#$"&)+=W5 Plug the Power Cord into a
properly grounded, GFCI protected 120 VAC
(20 amp rated) receptacle that matches the
plug and turn the Power Switch ON.
b. !"#$%&)+=W5 KJSVUHGLH5&M(4+92&/(2&
-)=/492&F*./:(&)+&/(2&34:\&)8&/(2&O2=>21&
/)&/(2&X)=/492&)8&/(2&)0/=2/&W)0&*.==&0'2,
If using 120VAC, connect the included
adapter to the end of the Power Cord. If using
240VAC, do not use the adapter. Plug the
Power Cord into a properly grounded and rated
receptacle that matches the plug and selected
voltage and turn the Power Switch ON.
L)/25 The circuit must be equipped with delayed
action-type circuit breaker or fuses.
K>=21&G1;
@22>&H2+'.)+21
S)*21&
F*./:(
-)=/492&
F*./:(&
(64805 only)
b"$-&/)&Cb$-&S=09&G>46/21
(64805 only)
-)=/492&'*./:(&4+>&6=09&+22>&/)&
32&:(4+92>&4/&/(2&'4;2&/.;2,
L)ZZ=2
M)+/4:/
H.6
JKR&R0+