Use and Care Manual

!
7!
www.titan-appliances.com
Installation Clearance Requirements
For built-in / under-counter installation, allow at least 2-3 inches of clearance at the back as shown in
the below diagram to ensure proper service access and ventilation.
The installation should allow adequate space for the unit to be pulled forward for servicing.
The appliance should be placed on a firm and level surface and be able to support the weight when the
unit is fully loaded.
The appliance must be leveled in order to work properly. The feet of the appliance can be rotated to
level and adjust the height of the unit. Please refer to the “Leveling the Unit” section for more details.
Please ensure that a standard electrical supply (115 VAC only, 60 Hz) is properly grounded in accordance
with National Electrical Code and local codes and ordinances.