Use and Care Manual

!
10!
www.titan-appliances.com
Operation
CHECK POINTS BEFORE OPERATION:
* Have you removed all packing materials and tape from the interior and exterior of the unit?
* Have you installed the unit properly by following the installation instructions?
* Has the unit been properly connected to the electrical outlet including proper grounding?
* Have you leveled the unit?
* Is the appliance properly located in an area where the ambient temperature is between 50°F
and 95°F all year round?
* Is the clearance of the unit, at least 2 to 3 inches at the rear provided for proper air
circulation?
THE CONTROL PANEL
This unit has a dual-zone temperature setting, the temperature ranges are:
Left Compartment: 38°F∼65°F (3∼18
o
C)
Right Compartment: 38°F∼65°F (3∼18
o
C)
F
BUTTONS
Power Button: Press and hold for three seconds to power on the unit. Once pressed the “Power”
indicator light will lit up to indicate the unit is running. Press and hold the button for three
seconds again, the unit will power off and the “Power” Indicator light will turn off.
Energy conservation button: Press and hold for three seconds to turn the energy conservation
mode ON/OFF. When this mode is turned on, the LED light and display will be turned off and
the °C/°F light will be on.
Light Switch: Press this button to turn on/ off the interior LED light.
Increase Temperature: To adjust the temperature, press button to increase the temperature by
1 degree increments.
Lower Zone Temperature: To adjust the temperature of the lower zone, press button to lower
the temperature by 1 degree increments.
°C/°F This unit can be displayed in Fahrenheit or Celsius. Press this button to change the setting.