TP-8500 Massage Chair OPERATION INSTRUCTIONS SAVE THESE INSTRUCTIONS
Thanks for purchasing this product. Please read this manual instruction carefully in order to know how to use this product correctly before operation. Please pay more attention to some important safety warning and keep this manual book properly for future use. Note: Our Company reserves the right to revise the design and description of this product without any further notice. Please refer to the actual color of this product.
IMPORTANT SAFETY INSTRUCTION When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using (this appliance) Safety And Maintenance instructions . 15)Keep children away from extended foot support (or other similar parts 16)Do not use massager in close proximity to loose clothing or jewelry. 17)Keep long hair away from massager while in use.
04 05
Function Name and function of components 1 2 9 3 4 5 10 6 11 12 7 13 1.Pillow pad 2.Upper arm air bag components 3.Arm air bag components 4.Armrest hotkey 5.Seat cushion 6.Leg rest frame 7.Foot rest frame 8.Calf stop sealing plate 9.Back rest pad 10.Armrest decoration 11.Manual controller pocket 12.Armrest 13.Side cover 14.Back cover 15.Manual controller 16.Drive box cover 17.Safety switch 18.Base caster 19.Power line and power plug 20.Power socket 21.Fuse box 22.Power switch 23.
Method of usage Method of usage 1.Switch power supply on Diagram of plug in Diagram of the switch position of power supply 2.Start to massage 1). Press power button, massage chair automatically reclining, and start massage. 2). Automatic shoulder position and massage acupressure point detection, waiting for the completion of testing. 3). If there is difference with the massage balls and the actual shoulder position, youcan adjust the up and down button to a suitable position.
Method of usage Method of usage Characterized auto massage Function Function Button Feature Deeply massage on acupressure points, effectively alleviate pain Loosen body physique Characterized auto massage Promote blood circulation Display Auto F1 Auto F2 Auto F3 Fast to experience all the massage effect (press for 2S, switch to speed press) Auto F0 Massage focus on upper body Auto F4 Massage focus on lower body Auto F5 Back Stretch Adjust Massage Ball Fixed position (fixed point) massage ba
Method of usage Method of usage 3.USB recharging function and lie-down function. WARNING ON/OFF Function Switch USB Calf rise and drop Backrest rise and drop Set with safety switch in a power supply box, if there is heavy pressure on power supply box, then forced stop back lying function, prevent hurts peoplewhen lying. Description Button 5.
Method of usage Method of usage . Unscrew the screw on the front-end of armrest (note: the screw is in the side of steel frame). (figure 7) . Unscrew the screw on the front-end of armrest (note: be careful not missing the plastic block for fixed). (figure 8) 6.Armrest installation method Connect the air pipe on the back-end of armrest to the upper arm's. (figure 1) Put the air pipe and power cord into the steel frame (avoid the air pipe stuck). (figure 2) Figure 1 Figure 7 Figure 8 .
Method of usage Method of usage Connect the joint of air pipe and power cord (note: there's marks on the air pipe and size of cable connectors is different, you won't miss it). (figure 9) Pull the calf rest air pipe and power cord through the hole of front dam-board, then tighten the screws of dam-board. (figure 10) Figure 9 7.
Method of usage Method of usage 8.Pillow and backrest pad's dismounting and use manual 10.Method of movement Make sure that all wires are far above the ground, tilt the backrest backward to acertain degree (with the gravity center resting on the wheels), push the chair forwardor backward with your hands and finally resume the chair to the normal position in aslow and gentle manner.
