Full Product Manual

·When you place the massage chair, the backrest should always be kept at least

275mm away from the wall. If the backrest is too close to the wall, it will be collide

the wall and cause damage to the product when it laying down.

275mm

Method of usage

8.The distance from the wall

7.Method of movement

·Make sure that all wires are far above the ground, tilt the backrest backward to

a certain degree (with the gravity center resting on the wheels), push the chair

forward or backward with your hands and finally resume the chair to the normal

position in a slow and gentle manner.

Note: During movement you must turn off the power first and then unplug the

power cord and the controller cord.

Method of usage

1 2

5. Head cushions and backrest pad's dismounting and use manual

·The head cushion allows you to control the intensity of the neck and shoulder

massage, You can decide whether to use the head cushion (Recommend to use).

The backrest cushion and the backrest is connected by

a zipper (1), head cushion

and the backrest cushion connected by the Velcro as show in the illustration (2).

Zipper

Thread gluing

·Do not put the heavy massage chair directly on the wood floor for it may

cause damage the floor, so please place a carpet or other object to avoid

this damage.

Caution: Do not move the chairs with its wheels on the wooden floor, rough ground,

or in a narrow space. Two people are required to lift the chair. During the lifting

period, take the calf rest end sealing plate and backrest cover grooves as the force-

bearing point(Please do not lift armrest directly.)

6.Floor Protection