Product Manual

PowrCoat 19
GB
Servicing
Reassembly Procedure
1. Insert upper packing set (19) into pump block (21).
Attention
Peak of “V” packings must point upwards on
reassembly.
2. Insert upper spring (18); small end of spring must go toward
the packing set.
3. Insert spring retainer (16).
4. Place new lower packing set (14) over piston seat (13).
Attention
Peak of “V” packings must point downward on
reassembly.
5. Replace spring (15), spring retainer (16) and ball (17) on piston
seat (13).
6. Thread piston seat (13) back onto displacement rod (6).
i
Use Loctite on clean threads.
7. Insert displacement rod (6) assembly through upper packing
set (19) in pump block (21).
8. Place O-ring (20) on end of cylinder (12) and thread back into
pump block (21).
i
Lubricate all O-rings before assembly.
9. Insert new ball (11), ball cage (10), and new Buna O-ring (9)
into foot valve (7).
i
Ball cage pin (10a) to be in lower position unless
pump is to be used for heavy block ller, roong
materials or inorganic solvent-borne zinc coatings.
10. Place new Teon O-ring (8) on cylinder (12) and then install
foot valve assembly (7).
i
It is not necessary to overtighten foot valve and
cylinder into pump block. O-ring seals perform
sealing function without excessive tightening. Full
thread engagement is sucient. The foot valve
(7) may be rotated back up to 3/4 turn from full
engagement for convenient hose position.
11. Insert connecting rod (5) through coupling nut (4) and thread
connecting rod (5) into displacement rod (6).
12. Hold the air motor piston rod (3) at the wrench ats and
thread coupling nut (4) to secure the pump to the motor.
 13. Usingthestanchions,thestanchionnuts(1)andwashers(2),
secure the pump assembly to the bottom of the unit.
14. For siphon hose attachment, it is critically important that the
thread of the siphon hose t snugly into the foot valve with
the hose assembly couplings Teon-taped and sealed to
prevent air inlet leakage.
Service Kits
i
The minor service kits for pump assembly 185-551
come in three versions. They include kits with 1)
Polyethylene/Leather packings, 2) Leather packings
and 3) Teon packings
Service Kits
185-551 pump service kit, minor
Kit Part
No.
Packings* Description
185-050 Polyethylene/
leather
Includes items 9, 11, 14, 17, 19, 20 (2),
andLoctitesealant426-051
180-051 Leather Includes items 9, 11, 14, 17, 19, 20 (2),
andLoctitesealant426-051
185-052 Teon Includes items 9, 11, 14, 17, 19, 20 (2),
andLoctitesealant426-051
185-551 pump service kit, major
185-500 Polyethylene/
leather
Includes minor service kit 185-050 and
items 6, 12 and 18
185-501 Leather Includes minor service kit 185-051 and
items 6, 12 and 18
185-502 Teon Includes minor service kit 185-053 and
items 6, 12 and 18
 * RefertotheSparePartsListforpumpassembly185-551for
the part numbers of each type of upper and lower packings.