User's Manual

N
S
COMPASS
ALARM
Compass
Indication of the geographical north
Activation of the crystal
Activation of the compass
function
(1)
Activation of the adjustment of
the magnetic variation
(2)
Setting the magnetic variation to
the east (+) or west (-)
Validation of the setting
(eg. 2° East)
(1) The minute hand points to the North. A more accurate reading is obtained by
holding the T-Touch horizontally.
The digital display gives the set magnetic variation.
After 30 seconds, the digital display returns to “h-m-s” mode.
(2) For more information, see the explanation of the magnetic variation on page 11.
1”
2”
+ or - 1 degree
Activation of the crystal
Activation of the alarm function
(eg. 12h19’)
Activation of the alarm
Setting the time
Incrementation or decrementation
by one minute
Validation of the setting
(1) When the programmed time is reached, the alarm can be stopped by pressing
one of the pushers.
The alarm bell sounds for 30 sec. and is not repeated.
Deactivation of the alarm
1”
1”
2”
+ or - 1 minute
www.tissot.ch 8/14
138_en / 01.07