User's Manual

Synchronisation
Display mode
(h-m-s / date / units)
(1)
(1) Procedure allowing the digital display to be synchronised with the hands.
Note: it is not necessary to perform this synchronisation operation when the
digital display and the hands show the same time.
(1) The “h-m-s” and “date” modes remain active.
(2) The “units” mode is a temporary setting mode.
(3) This procedure is valid when the crystal is activated for the ALTIMETER,
CHRONO, COMPASS, ALARM, THERMO and METEO functions.
Activation of the crystal
Selecting the “Units” mode
Using pushers
and , bring
the 2 hands precisely to 12
o’clock
Incrementation of the minute
hand (3 steps = 1 minute)
Incrementation of the hour
hand (3 steps = 1 minute)
Validation of the setting
1”
5”
Activation of the crystal
Selecting the display mode
Return to h-m-s mode
(3)
1”
date
(1)
h-m-s
units
(2)
www.tissot.ch 4/14
138_en / 01.07