Product Manual

Initial Setup
Prior
to starting the initial setup, charge the il0 using the supplied charging block and
USB cable. While the il0 is charging, please complete steps l to 3.
Step 1: The first step in setting up your il0 is to connect the included signal booster
to a 12V or 24V power source. When plugged in, you will see a green power indicator
light. There
is also a blue light which will blink every time a signal is repeated from
the transmitter - which is generally once every 4 minutes, unless an issue is occurring.
As this unit is designed for RVs ranging from Travel Trailers to Class A MotorHomes,
please read
the specific instructions that are included in the booster's packaging or
see page 7. Please note, while the booster will increase the transmitting range, it is
primarily designed to eliminate signal interference. Due to this crucial function,
THE BOOSTER
MUST BE INSTALLED.
Step 2: After installing the
booster, insert the CR1632 coin
cell batteries into each
transmitter. To install, remove
the battery from its
packaging, unscrew
the transmitter's black cap
counterclockwise, and insert
the battery into the
transmitter's battery bracket with the smooth side
(+)up.
Step 3: Once each transmitter has a CR1632 battery installed, turn on
the il0 monitor. You should see an image like the one on the left.
Once the monitor is on, you should see MONITORING in the center
of the display. What this means is that you are currently in