Product Manual

Transmitter Batteries & Proper Disposal
TireMinder External and Flow-Through transmitters use
CR1632 style batteries. Please dispose of any used lithium
batteries properly. Contact your local waste disposal company for drop off locations.
Powering on
the Monitor
Press & Release the TOP button to turn on the monitor. Upon turning on the monitor will automatically be in the
MONITORING mode.
Once turned on,
the ilO will automatically start to search for updated tire information. After a lengthy shutdown
(either powered off
or asleep), the readings will be in the memory of the monitor from when it was last turned off
(the night before,
the week before or whenever it was last active). It will take approximately 4 to 10 minutes to
update the pressures and temperatures.
You may also initiate
the Auto-search function (page 13). In this case, all readings will go to O PSI and 32°F. If all is
well, updated pressures and temperatures will be back within 10 to 20 minutes.
Manually Turn
Off the Monitor
From MONITORING mode, press & hold the TOP button until the screen goes completely blank. This will take
about 10 seconds.
Signal Loss
If SIGNAL LOSS appears on the display, it means the monitor has lost the signal from one or more transmitters.
Also, the top LED will blink red. This issue needs to be addressed when convenient (before leaving on a trip, at the
next rest stop or campground, etc.).