Product Manual
Units
of
Measurement
{PSI/BAR. .. }
The TireMinder
ilO
is
setup
to
default
to
PSI
and
°F
(Fahrenheit).
If
you would like
to
change this
to
Bar
(barometric
pressure)
or
•c (Celsius), please use
the
instructions below.
1.
From
MONITORING
mode, press and hold
the
center
button
for 5 seconds until you hear a
beep
and
see
P (Pressure Setting
Mode}
in
the
top
center
of
the
display.
2.
Once
in
P mode, you
will
see
PSI
flashing. You may use
the
left
or
right buttons
to
toggle from
PSI
or
Bar.
With your desired pressure unit selected, press and release
the
center
button.
3.
°F
will
now
be
blinking.
Using
the
left
or
right buttons, you
will
be
able
to
toggle between
°F
(Fahrenheit)
or
°F
(Celsius). With
the
correct
temperature
unit selected, you may now exit P
mode
by pressing and
holding
the
center
button
for 5 seconds until you hear a
beep
and
see
MONITORING
in
the
top
center
of
the
display.
Battery Life
and
Low Battery Indicator
The
ilO
monitor has a built-in Lithium-Ion rechargeable
battery
which under normal use
will
function for 8
to
12
hours before requiring a re-charge. Please note, you can
extend
the
battery life by turning
the
monitor off when
not
in use. To
do
so, press and hold
the
TOP
button
for a fully
10
seconds until
the
screen goes blank.
The level
of
charge is displayed
in
the
top
left
portion
of
the
screen. You may recharge
the
unit
at
any
time
if you
feel it may
be
necessary.
If
the
last bar disappears,
the
unit
will
beep
several times and
the
battery icon
will
flash. If
you
don't
plug it
in
soon,
the
monitor
will
shut
down completely. To re-charge, simply use
the
supplied
USB
charger.
A full charge takes approximately 6 hours. When charging, you
will
see
a lightning
bolt
to
the
left
of
the
battery,
along with a charging animation inside
the
battery.
Once
fully charged,
the
lightning
bolt
will
disappear, and
the
animation will stop.