Product Manual
Adding Transmitters
Your TireMinder il0 can add up
to
10
tires,
per
vehicle. To
add
transmitters, please use
the
instructions below.
Note, you
do
not
need
to
delete any currently learned transmitters
in
order
to
add additional transmitters.
1.
From
MONITORING
mode, press and hold
the
left and right buttons until you hear a
beep
and see
LEARN
near
the
top
center
of
the
screen.
2.
Using
the
right
or
left buttons, move
to
the
tire position you would like
to
add.
3.
Once
at
the
tire position you would like
to
add, screw a transmitter
onto
that
corresponding tire
position. Within 6 seconds you
will
hear a
beep
and
see
the
current tire pressure.
4.
Continue adding transmitters using
steps
2 and
3.
If
you are done adding transmitters, return
to
monitoring
mode
by pressing and holding
the
left
and right buttons for 5 seconds until you hear a
beep
and
see
MONITORING
in
the
top
center
of
the
display.
Move
a Single Transmitter
To move a single transmitter, please following
the
instructions:
1.
Remove
the
transmitter you
wish
to
move from
the
valve
stem
and
set
it aside.
2.
From
MONITORING
mode, press and hold
the
left and right buttons until you hear a
beep
and
see
LEARN
near
the
top
center
of
the
screen.
3.
Using
the
right
or
left buttons, move
to
the
tire position you would
like
to
replace.
4.
Once
at
the
tire
position you would like
to
move, press and hold
the
center
button
until you hear a
beep
and
see
"-
-"
instead
of
a tire pressure. The transmitter
is
now deleted.
5.
Using
the
right
or
left buttons, move
to
the
tire position you would
like
to
add
the
transmitter and screw
the
transmitter
onto
the
corresponding valve stem. Within 6 seconds, you should
see
"--"change
to
the
current tire pressure.
If
you are
done
moving transmitters, return
to
monitoring
mode
by pressing and
holding
the
left and right buttons for 5 seconds until you hear a
beep
and
see
MONITORING
in
the
top
center
of
the
display.