Product Manual
•
•
•
•
"Starting Overn Full
Delete
Mode
When implemented, this
will
delete
transmitter
codes
from
all
transmitters
that
had
been
mounted. It
is
activated
from
the
LEARN
Mode. When complete,
all
20 tire positions
will
be
empty, displaying
"-
-".
When
to
delete:
Here's how:
If
you think you've screwed up
the
installation and want
to
start
over.
If
someone has removed
all
the
transmitters and you
don't
know which goes where.
If
you are making a major change
in
RVs
and
the
wheel positions need
to
be
moved
(5
th
wheel
to
coach
or
reverse).
You've
got
nothing
better
to
do
and just
want
to
re-install
the
system!
1.
From
MONITORING
Mode, press and hold
the
Left
and Right buttons
for
5 seconds (until
all
20
positions appear). The screen
will
show
LEARN
in
the
top
center
of
the
display.
2.
You will
see
that
all
your currently active
tire
positions display a
tire
pressure.
3.
Press and hold
the
Center and Right buttons. After 5 seconds,
the
unit
will
beep
twice, and each
tire
position
will
read
"-
-".
4.
Since
you
are
already
in
the
LEARN mode, you may start
the
re-install process immediately (page
2).
5.
If
you are
not
ready, you should exit from this
mode
by pressing and holding
the
Left and Right buttons
until
all
20 positions disappear.
6. You will
be
back
in
MONITORING
mode. From here, you may
start
over
at
any time.