Product Manual

•
•
•
•
Auto-Search Mode
This mode is really cool! It all happens while in MONITORING mode and can only be used after all transmitters
have
been installed. When implemented, all current pressures will go to 0 PSI and the temperatures reset to 32 ' F.
The monitor will then automatically search for updated pressures and temperatures from all tires. All should be
recovered within 20 minutes.
When to use this mode:
After
the rig has been in storage.
If you
see "Signal Loss" on the monitor.
If you feel
one or more positions are not updating.
In the morning before getting back on the road as the monitor may still show ye sterday's
information.
Quick-Tip: The auto-search function
will not work if the monitor is close to requiring a re-charge.
Here's how:
1. Press and hold the Center and Right buttons for 3- 5 seconds.
2. You will hear a double "beep". All wheel position circles will reset with the pressures showing 0 PSI . The
temperatures will all be reset at 32°F (or O' q.
Updated pressures and temperatures will not all appear at the same time (be patient). If after 20 minutes, the
monitor does not receive an update from one or more transmitters, the unit will beep several times and the
missing position will flash and show "Signal Loss".