Product Manual
Step
5:
Repeat Step 4 until
all
tire transmitters have been learned
to
the
monitoring. Once complete, press and hold
the
left and right
buttons
for 5 seconds until you
see
MONITORING
on
the
display.
Setting up
the
ilO
- Pressure
(P)
Setting Mode
You're now
at
the
home stretch! The last part
of
setting up your
TireMinder
il0
is
informing
the
monitor what tire pressures you're
currently running.
Step
1:
From Monitoring Mode, press and hold
the
center
button
for
5 seconds until you see
P
in
the
center
of
the
display.
Step
2:
PSI
should now be flashing on your display. You may press
and release
the
right
or
left
buttons
to
toggle
between
PSI
(Pounds
per
square inch) and
Bar
(Barometric Pressure). Pressing and releasing
the
center
button
will
move you
to
°F.
With
°F
flashing, you may press
and release
the
right
or
left
button
to
toggle
between
°F
(Fahrenheit)
or
°C
(Celsius). Once you have selected your
desired units
of
measurement, press and release
the
center
button. You
will
now
see
your first tire position
blinking.
Step
3:
While
the
tire position
is
blinking, you may use
the
right
or
left
buttons
to
raise
or
lower
the
tire pressure,
respectively. Use
these
buttons
to
set
the
appropriate (or cold) baseline tire pressure for your vehicle. Once set,
press and release
the
center
button
to
move
to
the
next tire.
Step
4:
Repeat Step 4 until you have
set
each tire's appropriate tire pressure. Once complete, press and hold
the
center
button
for 5 seconds until you
see
MONITORING
in
the
center
of
the
display.