Instructions / Assembly

Warning
Do treat your eBike like any bicycle you would want to
last well… keep it stored somewhere secure and away
from the elements.
Don't treat your eBike as a dirt-bike! The motor and
battery are weather proof, but not water-tight. It is ok
in rain, but not to ford streams, etc!
Don't power up the throttle while the eBike is held
stationary. Motor operation for more than a few
seconds while the wheel is locked/stationary can
damage the motor and controller.
Important: Your bike will arrive with the battery
partially charged. You need to give it a full charge
before ANY use. The batteries have been
precondition-cycled, so no need to do 3 full deep
discharges as for some other brands. Just charge
and go... then just top your battery up after each use
(lithium batteries prefer shallow discharge). Then
give your battery a complete discharge and full
charge every 3 months or so to keep the cells well
balanced.
Note: The LCD battery display bars will dip under full
load (on hills, etc). This is normal as running voltage
drops under high load. To get an accurate battery
reading, wait about 10 sec after the motor is not in
use. The 8 step capacity lights on the battery will give
you a more accurate idea (button on top rear of battery
– more info later in manual).
Do take extra care on the road as you will be travelling
faster than you normally do on a bike and your bike is
now power-assisted, so will behave differently.
Don't let others ride your eBike unless you have
properly explained safe and appropriate use to them.
Don't attempt to open the motor or battery should
your system malfunction. This will void the warran-ty.
Return it to the store you purchased it from.
Do make sure your charger has free air movement
around it as it will get quite warm.
Don't use your charger outdoors. It is for indoor use
only.