Instructions / Assembly

VLCD Display Panel Controls
3.4 Vehicle Mode
3. Speed Display
Maximum Speed: MAX
Average Speed: AVG
Measuring Unit: MPH or KM/H
The display will calculate the actual travelling
speed based on the wheel diameter and signal
data (number of magnet steel is needed for Hall
motors).
3.6 Vehicle Status
Digital Voltage
Motor Failure
Throttle Failure
Controller Failure
Brake Indication
Wheel Diameter
3.7 Error Code
Error Code (decimal)
Indications
Note
Normal
Reserved
Brake
PAS Sensor Failure (riding mark)
6km/h Cruise
Real-Time Cruise
Low Battery
Motor Failure
Throttle Failure
Controller Failure
Communications Receiving Failure
Communications Sending Failure
Communications Sending Failure
Light Failure
Not Realized
1
2
3
4
5
6
7
8
9
10
11
12
13
0
3.8 Settings
P00: Restore Factory Settings Set this value to 10
and switch to next setting, the display items will show
all contents and restore original factory settings.
P01: Backlight Brightness (1: darkest; 3: brightest)
P02: Mileage Unit (0: KM; 1: MILE)
P03: Voltage Class 24V / 36V / 48V
P04: Sleep Interval
(0: never, other value means display sleep interval)
Unit: minute