Portable Basketball Hoop User Manual
M10*16 M10*85 M8*25 H M8*85 M8*95 I M8*55
Insert Axles (#1A) into the Wheels (#10) as shown. Next press wheels into the Base (#11). Place the Lower pole (#6) into the top side of the Base (#11) and place into position in the base and slide Axle (#1B) through holes on the bottom of the base. (Note: the holes on the pole must face towards the base side.
Firstly, fix the Lower Left and Right Braces (#2) with bolts, nuts and washers (#C) to the bottom of the base. Next, lock the Lower Left and Right Braces (#2) to the Lower Pole (#6) with Bolt, Nut and Washer (#G).
Remove the cap from the hole and fill the base with sand or water.
Attach the backboard frame (Part 3) to the EDFN RI WKH backboard (Part 8) and secure with screw (Part A). Attach the ring (Part 7) to the backboard (Part 8) with hardware (Part H & I) to secure the ring, backboard, backboard frame together. Slide the screw (Part B) through the backboard frame and top pole and secure. Nylon Insert Lock Nuts, may require more effort to tight. Please tight until find the ideal spring strength for the rim. Normally the bolt end may come out around 3/8inch.
5 Attach the net (Part 9) to the ring.
6 Insert the top pole (Part 4) into the middle hole (Part 5) and secure with screw (Part D).
