Owner's manual

Common speed settings are displayed as their notation value (t = triplet, d =
dotted):
DIN 4 24 PPQN
64th 6
32t 8
32nd 12
16t 16
32d 18
16th 24 4 PPQN
8t 32
16d 36
8th 48
4t 64
8d 72
4th 96 1 PPQN
Clock Shift Mode:
Clock Shift moves the trigger in time by whole clocks steps. The range is from 0 to
Division-1 so a division of 4 can be shifted up to 3 clock ticks.
Example:
Divide 8, Clock Shift 0 triggers on counts 8, 16, 24, 32...
Divide 8, Clock Shift 5 triggers on counts 13, 21, 29, 37...
Time Shift:
Time shift moves a trigger in time by very small increments which are a fraction of
the clock rate of a division and is great for adding swing and off the grid timings.
The values are in degrees from 0 to 360 giving very fine adjustment in timing. It
is also calculated after Clock Shift so Time Shift can be a fraction of the Clock
Shift delay. 180 degrees is halfway between the Divide + Clock shift and the next
division. The combination of Clock and Time Shift will never be more than the total
time of a division.
Examples
Divide 8, Clock Shift 0, Time Shift 180: 12, 20, 28, 36
Divide 8, Clock Shift 4, Time Shift 0: 12, 20, 28, 36
Divide 8, Clock Shift 4, Time Shift 180: 14, 22, 30, 38
17