Instruction Manual

Please note your lls are NOT recorded in your Step sequences. Fills are designed for live perfor-

mance.

Let’s have some fun and have a ll with 1/32 triplets. Press the Fill button again to select options for

your ll. The Preset column has divisions from top to bottom of triplet notes of 1/4, 1/8, 1/16, 1/32

duration. Select the 4th button down. Now, press Fill twice to return to an active Fill. Press down the

Trig4 button to re your ll with 1/32 triplets.

(For further information on programming lls of different note values, see the section on Fills in the

Circadian Rhythm Functions in Detail) section.

Triggers

Simply put, triggers allow you to record steps to your patterns live and on the y. Some folks feel

more comfortable with this approach to building up rhythmic patterns or sometimes when you have a

good pattern going, it’s great to be able to add beats in real-time. Regardless, CR has you covered.

To activate Trigger programming, hold down the Fill button. The Fill button will turn green and the

Trig1-Trig8 buttons will turn red. The red Trig buttons indicate that they are armed for recording.

While the CR is playing, to record a step in your current Preset, press the Trig for the Channel you

wish to record a step. For example, if you want to record a step on Channel 5, press Trig5. Your step

will be record in the appropriate Channel’s Preset quantized to the nearest 16th note.

Apart from inputting Steps in realtime, there’s nothing special about Steps that have been recorded

using the Trigger function. You can edit them the same as you would for any other Step.