0/2011 Version 3
About This Guide tiptel VP 28 is an H.264 based broadband videophone supporting Video and Voice applications. Its major functions include IP Telephony, IP Camera Viewer (SIP based) and Photo frame. It can satisfy the demanding requirements of the next generation of IP broadband communication applications and open the door to the world of multimedia. tiptel VP 28 is an innovative IP media phone equipped with the most advanced video compression technology.
1 Safety Precautions General Requirements Before you install and use the device, read these safety precautions carefully and observe them during operation. During storage, transportation, and operation, keep the device dry. During storage, transportation, and operation, avoid collision and crash for the device. Never attempt to dismantle the device by yourself. In case of any fault, contact the appointed maintenance center for repair.
Before plugging or unplugging any cable, shut down the device and disconnect it from the power supply. While plugging or unplugging any cable, make sure that your hands are completely dry. Do not tread on, pull, or over-bend any cable. Otherwise, the cable may be damaged, leading to malfunction of the device. Do not use an old or a damaged power cable. During lightning whether, stop using the device and disconnect it from the power supply.
Contents 1 Safety Precautions .......................................................................................................................... 1 2 Getting Started ............................................................................................................................. - 1 Packing List ..................................................................................................................................................... - 1 Assembling the Phone .....................
Video....................................................................................................................................................... - 29 TV Output ............................................................................................................................................. - 30 Setting the Send Key ....................................................................................................................... - 30 Anonymous Call ................................
Using Address Books to Make a Call ........................................................................................... - 70 Using the IP Address to Make a Call ........................................................................................... - 70 Using Speed Dial to Make a Call .................................................................................................. - 71 Answering a Call ..............................................................................................
tiptel VP 28 2 Getting Started Getting Started Packing List The following components are included in your package: IP Video Phone tiptel VP 28 Power Adapter Handset & Handset Cable -1-
tiptel VP 28 Getting Started Ethernet Cable Quick Installation Guide & Quick Reference Please unpack the product package with caution; inspect the items closely. If you find any damaged item, please contact your IP Video phone reseller immediately. Also, please keep the box and packing material for future use in the event of future shipments. Assembling the Phone This section introduces how to assemble the phone.
tiptel VP 28 Getting Started Headset is not included in the packing list. Should be purchased separately. Connect Network and Power There are two ways for network and power source connections. You can connect the phone to the AC Power directly using the power adapter or to a PoE compliant switch or hub. Your system administrator will advise you on which one to use. If inline power is provided, do not install AC adapter. Make sure the Ethernet cable and switch/hub is PoE compliant.
tiptel VP 28 Getting Started Configuration and Registration Configuring via Web Page Press button on the keypad of the phone to enter the status page and find out the IP address of the IP video phone. Enter it (for example http://10.1.3.204) into the address bar of web browser. The default login name and password are admin/admin. Please locate your PC in the same network segment of IP phone (10.1.3.X) to access the web configuration page. Please consult your system administrator for help.
tiptel VP 28 3 Overview Overview Keypad Instruction Figure 3-1 Keypad instruction You can check the following list which introduces the IP phone’s keypad in detail: Table 3-1 Key on the keypad Key Description Event Status Indication LED It will show the event status of the video phone. For more details you can refer to “LED Instruction”. Power Indication LED Indicates the power supply status. When tiptel VP 28 is powered on, the indicator is on.
tiptel VP 28 Overview Key Description Navigation Key Includes four arrow keys (up, down, left, and right), and one key. Arrow keys Move the cursor on difference pages. In the standby state: press left or right key to switch the standby state. During the conversation: press left or right key to Increase or decrease the volume. In the incoming call status: press left or right key to Increase or decrease the ring volume. key Select Screen Press this key to confirm the operation.
tiptel VP 28 Icon Overview Description Network Status: Limited Flashes when the internet is disconnected. Account register successful or the DSS key set as line, and the line is registered. Account register failed or the DSS key set as line, and the line is unregistered.
tiptel VP 28 4 Configuring tiptel VP 28 Customizing Your Phone Powering Up the Video phone Step 1 Plug a Network cable into the network port. Step 2 Plug in power. Step 3 It takes about 2 minutes to boot up the video phone. During this period, please do not touch any keys or turn off the video phone. The Idle Interface The phone has 4 idle interfaces (Standby state, Main menu, Picture Dial and DSS Key).
tiptel VP 28 Configuring tiptel VP 28 Area Description 4 Use the clock to display the current time user can use fingers drag this clock, placed it at any position of this interface. 5 Display the Quick function keys. The default is “History”, “Directory”, “Message” and “Setting”. 6 This area is showing the background picture. User also can change it. For more information you can refer to “Display”.
tiptel VP 28 Menu Configuring tiptel VP 28 Interface Second level submenu Message Media ---- Video Contact Picture ---- IP Camera Door Phone DSS Key ---- Picture Dial ---- Voice Mail ---- Hotline ---- Forward ---- Call Waiting ---- Auto Answer ---- Video ---- Tv Output ---- Key as Send ---- Anonymous Call ---- Account ---- Network ---- Application Call Feature Play Manager Photo Play Manager IPCamera01 IPCamera02 DP 1 DP 2 Call Feature Setti
tiptel VP 28 Configuring tiptel VP 28 Picture Dial This function key allows you to set the most frequently dialed numbers easily. The phone supports six contacts and allows user to choose the contacts picture. Switch the idle interface to Picture dial page, and then click the corresponding picture, if the picture is set with a number, the phone will dial the number directly. If not, the phone will turn to the configure page.
tiptel VP 28 5 Configuring tiptel VP 28 Configuring tiptel VP 28 Setting Interface User can configure many functions, such as: Account, Network, Call Feature, Display, Date & Time, Sound, Security, Personalize, Reset, Reboot and Calibration, To access the Setting page, proceed as follows: Step 1 Press the Left/Right navigation key in the standby state to switch to the Main Menu. Step 2 Click [Setting].
tiptel VP 28 Configuring tiptel VP 28 Parameter Description --User Name Account name that is specified by the VoIP service provider. The value is similar to a phone number or is a phone number. --Password Password corresponding to Register Name. The value is provided by the service provider. --Server IP address or domain name of the SIP server that is specified by the VoIP service provider. --Port Port number of the SIP server. The default value of tiptel VP 28 is 5060.
tiptel VP 28 Configuring tiptel VP 28 Table 5-2 Parameters about the Network Parameter Description DHCP If you select the DHCP check box, tiptel VP 28 automatically attempts to connect to the DHCP server for obtaining resources such as the IP address, subnet mask, gateway, and DNS server information. PPPoE If the xDSL modem is used, you can connect tiptel VP 28 to the network in PPPoE mode. For details about the user name and password, contact the network service provider.
tiptel VP 28 Configuring tiptel VP 28 Wallpaper Manager User can manage the wall paper, such as: Preview, Delete and import. To manage the wall paper on the LCD, proceed as follows: Step 1 Access the Settings page. Step 2 Click [Display]. Step 3 Click the . Step 4 Click the , , or . Only within the limits of authority can users delete the uploading pictures.
tiptel VP 28 Configuring tiptel VP 28 Parameter Description Time Format To set the displayed time format of your phone, 12-hour and 24-hour respectively. NTP Mode Whether to activate the NTP mode. If choose enable, tiptel VP 28 automatically obtains the Universal Time Coordinated (UTC) time from a dedicated NTP server. --Time Server IP address of the NTP server that provides the UTC time. Manual Mode Whether to activate the manual mode. If choose enable, user can set the time by yourself.
tiptel VP 28 Configuring tiptel VP 28 Step 4 Ringtones can be auditioned or deleted. Ringtone operation can also be conducted by importing through USB Step 5 Click the to return to the previous menu. The phone will ring when the cursor moves to whichever a ringtone document for your convenience. Only within the limits of authority can users delete the uploading ringtones. You can consult your system administrator for more details regarding the allocation of the limits of authority.
tiptel VP 28 Configuring tiptel VP 28 Figure 5-7 Admin password Set the Language To configure the Language on the LCD, proceed as follows: Step 1 Access the Settings page. Step 2 Click [Personalize] Step 3 Select a required language and click the . Step 4 The phone will pop up a warning frame. Step 5 Click the icon to confirm the operation and the phone will reboot.
tiptel VP 28 Configuring tiptel VP 28 Reset to the factory When there is something wrong or irrational with certain functional configuration of the phone, you can choose the factory reset to resume the initial configuration. To reset to the factory, proceed as follows: Step 1 Access the Settings page. Step 2 Click the . Step 3 Click [Reset]. Step 4 Input the administrator password, and then click the icon operation; Step 5 A dialog will be popped up to check whether to reset the phone.
tiptel VP 28 Configuring tiptel VP 28 Figure 5-10 Reboot Screen Calibration To Screen Calibration, proceed as follows: Step 1 Access the Settings page. Step 2 Click [Calibration]. Step 3 A dialog will be popped up to check whether to begin the calibration.
tiptel VP 28 Configuring tiptel VP 28 Figure 5-11 Screen calibration Call Feature Users can configure the call function through the option interface. The functions can be configured are as followed: DSS key, Picture Dial, Voice Mail, Hotline, Forward, Call Waiting, Auto Answer, Video, TV output, Key As Send and Anonymous Call. To access the Call Feature page, proceed as follows: Step 1 Press the Left/Right navigation key in the standby state to switch to the Main Menu. Step 2 Click [Call Feature].
tiptel VP 28 Configuring tiptel VP 28 DSS Key tiptel VP 28 provides Direct Station Selection (DSS) keys. You can assign various functions to DSS keys for using these functions quickly. Each DSS key can support 4 functions: line, speed dial, BLF, BLF list. When you set DSS Key as Speed dial, BLF and BLF List function, the DSS Key will turn green or other color. For example: When you set the DSS Key as Speed Dial, the DSS Key will turn green.
tiptel VP 28 Configuring tiptel VP 28 Figure 5-14 DSS key setting Table 5-4 The parameter specification chart of each option Parameter Description DSS Key 0X To display the serial number of the DSS Key. Type To choose what function the required DSS key to be set. The default type is “N/A”, namely no function set. Line To choose which line the function applies to. Label User-defined name displayed in the DSS Key interface. Value To input the corresponding configuration value, e.g.
tiptel VP 28 Step 5 Configuring tiptel VP 28 Click the . BLF To set the DSS Key as BLF, proceed as follows: Step 1 Click the “Type” option, and then choose “BLF” option in the pull-down menu; Step 2 Choose the line to be configured in the pull-down menu of the “Line” option. If you choose “Auto”, the default account at present is adopted; Step 3 Input the “Label”. Step 4 Input the monitor number to be configured in the “Value” field. Step 5 Input the feature code in the “Extension” field.
tiptel VP 28 Configuring tiptel VP 28 Table 5-5 The parameter specification chart of each option Parameter Description Display Name User-defined name displayed below the picture. Account To set the applicative account. If you choose “Auto”, the default account at present is adopted. Phone Number To set the automatically calling-out phone number Contact Picture Box To choose the applicative picture. Users also can upload pictures through auto provision.
tiptel VP 28 Configuring tiptel VP 28 Hotline The hot line function works when users pick up the handset or press the speaker key but do not dial any numbers or hang up within the preset duration. To set the hot line, proceed as follows: Step 1 Access the Call Feature page. Step 2 Click [Hotline]. Step 3 Enter the hot line number and set hot line delay. Step 4 Click the .
tiptel VP 28 Configuring tiptel VP 28 Figure 5-18 Forward setting If you enable the automatic forwarding function, the tiptel VP 28 automatically forwards incoming calls based on the preset forward type. If you enable the manual forwarding function, you can forward an incoming call by clicking and entering the forward-to number. Call Waiting When you are in a conversation and a new call comes, you can make the new call wait.
tiptel VP 28 Configuring tiptel VP 28 Figure 5-19 Call waiting Auto Answer Users can answer calls automatically through the set type of Auto Answer. It supports 4 types: Directly, After 5 seconds, after 15 seconds, and After 30 seconds. The phone supports the individual configuration of each distinct account. To configure the auto answer function, proceed as follows: Step 1 Access the Call Feature page. Step 2 Click [Auto Answer]. Step 3 Choose which account to be configured the Auto Answer function.
tiptel VP 28 Configuring tiptel VP 28 Figure 5-20 Auto answer Video Users can set the call type through this option, e.g. the default call type is video call or voice call, and whether the Local Video is enabled. The settings include the Bandwidth and Frame Rate. The phone supports the individual configuration of each distinct account. To configure video, proceed as follows: Step 1 Access the Call Feature page. Step 2 Click [Video].
tiptel VP 28 Configuring tiptel VP 28 TV Output The phone supports the TV output of videos. Users can set the formats of this option through auto or manual operation. To configure the TV output function, proceed as follows: Step 6 Access the Call Feature page. Step 7 Click [TV Output]. Step 8 Choose Auto or Manual in the pull-down menu of TV Output; Step 9 Choose the formats in the pull-down menu of TV Format; Step 10 Click the .
tiptel VP 28 Configuring tiptel VP 28 Figure 5-22 Key as send Anonymous Call If Anonymous Call is enabled, the phone of the opposite side cannot display your name when you make a phone call. You can also enable the Anonymous Call Rejection. When an anonymous call is coming, the phone will automatically reject it. The function can also be set through the server, which only requires the on/off feature code.
tiptel VP 28 Configuring tiptel VP 28 Figure 5-23 Anonymous call Directory Address books on tiptel VP 28 stores contact information. You can add, edit, delete, call, or search for contacts. You can also add, edit or delete the contacts group. To access the Directory page, proceed as follows: Step 1 Press the Left/Right navigation key in the standby state to switch to the Main Menu. Step 2 Click [Directory].
tiptel VP 28 Configuring tiptel VP 28 Black List and Anonymous defaulted by the system can only be operated the ringtone change without being conducted the operation of deleting and renaming. Adding a Contact To add a contact, proceed as follows: Step 1 Access the Directory page. Step 2 Click [Options]. Step 3 Click [Add] in the extensional menu to enter the New Contact page.
tiptel VP 28 Step 5 Click the icon Configuring tiptel VP 28 to confirm the operation The “Clear” operation is defaulted to clear all the contacts in the chosen group. If “All” is chosen to clear the group, then all the contacts on the phone (including Black List) will be cleared. Adding/Deleting/Clearing a Blacklist When the black list is recorded, the call from the contact is not accessible to your phone.
tiptel VP 28 Configuring tiptel VP 28 Call History Call History on tiptel VP 28 stores history information. You can delete or clear the history record. To access the Call History page, proceed as follows: Step 1 Press the Left/Right navigation key in the standby state to switch to the Main Menu. Step 2 Click [Call History]. To choose the Call History Type page, proceed as follows: Step 1 Enter into the Call History page, Press the Left/Right navigation key to switch the type.
tiptel VP 28 Configuring tiptel VP 28 To do the delete operation must have enough permission. Please consult your system administrator for more information about permission. Video To access the Video page, proceed as follows: Step 1 Access the Media page. Step 2 Click [Video]. Step 3 Click [Play], the phone will Automatic play the video, you can press any key to exit. Step 4 Click [Manager] enter into the manager page. You can preview, delete and enter into the USB device to import the video.
tiptel VP 28 Configuring tiptel VP 28 Figure 5-24 IP camera Table 5-6 Parameters about the IP Camera Parameter Description Basic The basic parameters Settings. --Device Model To select the device model --Display Name To set the display name which you want to display. --Phone Number To input the phone number of IP Camera. For more information you can consult your system administrator. --Account To set the applicative account. Advance The advanced parameters Settings.
tiptel VP 28 Configuring tiptel VP 28 Figure 5-25 Door phone Table 5-7 Parameters about the Door Phone Parameter Description Device Model To select the device model Display Name To set the display name which you want to display. Phone Number To input the phone number of Door Phone. For more information you can consult your system administrator. Unlock Pin To set the password corresponding to the Door Phone.
tiptel VP 28 6 Configuration Using the Web Browser Configuration Using the Web Browser Establishing a Configuration Environment Before accessing the Web configuration page, proceed as follows to establish a configuration environment and obtain tiptel VP 28's IP address. Prepare a PC that meets the following requirements: Installs Ethernet adapters and supports TCP/IP. Runs the Window 98 or later operating system. Installs a Web browser such as Microsoft Internet Explorer 6.
tiptel VP 28 Configuration Using the Web Browser Account: configures account registration or deregistration, voice, video parameters and some advanced features.Network: includes Internet Port (WAN) and advanced settings. Phone: includes basic settings (such as date and time) and feature settings. Contacts: configures information about local phonebook, remote phonebooks and LDAP.
tiptel VP 28 Configuration Using the Web Browser Account Tab Page Account On the Account tab page, you can configure information for a tiptel VP 28's account such as registration and deregistration, as shown in Figure 6-3: Figure 6-3 Account tab page Table 6-2 Parameters on the Account tab page Parameter Description Register Status Status of the account that you select. The options are Registered, Disabled, Unknown, and Register Fail. Account Active Whether to activate the account.
tiptel VP 28 Configuration Using the Web Browser Parameter Description Register Name Account name that is specified by the carrier. Only the administrator can set this parameter. Password Password corresponding to Register Name. The value is provided by the service provider. SIP Server SIP server's IP address or domain name, which is provided by the VoIP service provider. Port Port number of the SIP server. The default value of TIPTEL VP28is 5060.
tiptel VP 28 Configuration Using the Web Browser Voice Figure 6-4 Voice codecs page Table 6-3 Parameters on the Voice tab page Parameter Description Disable codecs Disabled voice coding types. tiptel VP 28 supports the following coding types: PCMU, PCMA, G.723, G.729, G.722, GSM, AACLC and iLBC. Enable codecs Enabled voice coding types. The types are listed in descending order of priority.
tiptel VP 28 Configuration Using the Web Browser Video Figure 6-5 Video codecs page Table 6-4 Parameters on the Video tab page Parameter Description Disable codecs Disabled video coding types. tiptel VP 28 supports the following coding types: H264, H263 and mp4v-es. Enable codecs Enabled video coding types. The types are listed in descending order of priority. Bandwidth Select the bandwidth. Frame Rate Select the bandwidth. Frame Rate I-Frame Refresh (s) Set the refresh time.
tiptel VP 28 Configuration Using the Web Browser Advanced Figure 6-6 Account advanced page Table 6-5 Parameters on the Advanced tab page Parameter Description UDP Keep-alive Message Whether to send a UDP message at an interval to keep a port always available. UDP Keep-alive Interval Interval for sending UDP messages. For example, 30 seconds. RPort Port through which the server sends a response to tiptel VP 28. Details about this parameter are specified in RFC 3581.
tiptel VP 28 Configuration Using the Web Browser Parameter Description Login Expire If a user does not perform any operations within the period specified by this parameter, logs the user out.Unit: second Default value: 3600 Local SIP Port Port for the SIP server to communicate with tiptel VP 28. Default value: 5060 SIP Session Timer T1 Round trip time (RTT) between the server and the client. If the network latency is long, set it to a greater value. Details about RTT are specified in RFC 3261.
tiptel VP 28 Configuration Using the Web Browser Parameter Description Refresher Party who updates sessions. The value Uac indicates that the client updates sessions, and the value Uas indicates that the server updates sessions. Subscribe Register Whether to enable the subscription function for registration. This parameter is used to monitor account registration when the IP Multimedia Subsystem (IMS) system is involved. Subscribe for MWI Whether to subscribe to the MWI service.
tiptel VP 28 Configuration Using the Web Browser Network Tab Page Internet Port (WAN) Figure 6-7 Internet port Table 6-6 Parameters on the Internet Port (WAN) tab page Parameter Description DHCP If you select the DHCP check box, tiptel VP 28 automatically attempts to connect to the DHCP server for obtaining resources such as the IP address, subnet mask, gateway, and DNS server information.
tiptel VP 28 --Password Configuration Using the Web Browser Password that is specified by the network service provider. Advanced Figure 6-8 Network advanced page Table 6-7 Parameters on the Advanced tab page Parameter Description --VLAN The value Enabled indicates that the VLAN function is enabled for the Internet port. --VID ID of the VLAN where the IP phone belongs to. The network administrator divides the network where the switch resides into multiple VLANs. Each VLAN has a unique ID.
tiptel VP 28 Configuration Using the Web Browser Phone Tab Page Preference Figure 6-9 Preference page Table 6-8 Parameters on the Preference tab page Parameter Description Language Language displayed on Web pages. Time Zone Local time zone. Primary NTP Server IP address of the primary NTP server that provides the UTC time. Secondary NTP Server IP address of the secondary NTP server that provides the UTC time.
tiptel VP 28 Configuration Using the Web Browser Features Figure 6-10 Features page Table 6-9 Parameters on the Features tab page Parameter Description Forward Configures the call forward function. Call forward types include Always, Busy, and No Answer. Always Forward Whether to always enable the call forwarding function. If you select On, tiptel VP 28 forwards all incoming calls to a preset number. Target Number that incoming calls are forwarded to.
tiptel VP 28 Configuration Using the Web Browser No Answer Forward Whether to enable the no answer forwarding function. If you select On, tiptel VP 28 forwards incoming calls to the preset number when they are not answered within the preset duration. After Ring Time Maximum no-answer duration to forward incoming calls. Target Number that incoming calls are forwarded to. Call Waiting Whether to enable the call waiting function. Hotline Number Hotline number.
tiptel VP 28 Configuration Using the Web Browser Figure 6-11 DSS key Table 6-10 Parameters on the DSS Key tab page Parameter Description Key Choose which DSS key to assign the function. Type Function that you assign to a memory key. There are 4 kinds. For more information about the function, please refer to Table 6-11. Line Account that you configure a function for. Label Self-defined function name, which is displayed next to the corresponding DSS key on tiptel VP 28.
tiptel VP 28 Configuration Using the Web Browser Line Functions as a line key. Select Auto or Line 1 to Line 4. This parameter is dimmed. This parameter is dimmed. This parameter is dimmed. Speed Dial Functions as the speed dial key. Select Auto or Line 1 to Line 4. Self-define d function name Enter the speed dial number. This parameter is dimmed. BLF Listens on a number.
tiptel VP 28 Configuration Using the Web Browser Figure 6-12 Replace rule Dial-now rule: After you enable this rule, tiptel VP 28 makes a call as soon as you enter the preset number. For example, if you set Dial-now Rule to 0147, TIPTEL VP28makes a call to 0147 for the setting time after you enter 0147. The setting time is the value which you input in the “Dial now Delay time (0~2000ms)” field. The phone supports this rule of each distinct account.
tiptel VP 28 Configuration Using the Web Browser Figure 6-13 Dial-now rule Door Phone Figure 6-14 Door phone - 56 -
tiptel VP 28 Configuration Using the Web Browser Table 6-12 Parameters on the Door Phone tab page Parameter Description Door Phone List Select a Door Phone which you want to configure in this list. Device Model Select the device model Display Name Set the display name which you want to display. Phone Number To input the phone number of Door Phone. For more information you can consult your system administrator. Unlock PIN Set the password depends on Door Phone.
tiptel VP 28 Configuration Using the Web Browser Display Name Set the display name which you want to display. Phone Number To input the phone number of IP Camera. For more information you can consult your system administrator. Access PIN To input the PIN depends on IP Camera. For more information you can consult your system administrator. If the IP Camera hasn’t been set a PIN, user can see the video directly. If the phone has been set a PIN, user must input the PIN at first.
tiptel VP 28 Configuration Using the Web Browser Figure 6-16 Local phone book Remote PhoneBook Each tiptel VP 28 is configured with a local address book. A public address book is required for all phones in an enterprise. After a remote address book is enabled, users can access the remote address book.
tiptel VP 28 Configuration Using the Web Browser Figure 6-17 Remote PhoneBook LDAP The LDAP address book provides the following functions: Searches for contacts. After pressing the DSS key assigned with the LDAP function and entering a number or letter on the page that is displayed, tiptel VP 28 will search the LDAP server for contacts based on certain rules and display search results on the screen. You can select a contact and make a call. Searches for caller names.
tiptel VP 28 Configuration Using the Web Browser Figure 6-18 LDAP page Table 6-14 Parameters on the LDAP tab page Parameter Description LDAP Whether to enable or disable LDAP. LDAP Name To input the LDAP name. LDAP Name Filter Name filter. After you enter a name, the IP phone uses the name filter to search the LDAP server for the contact. The settings for the name filter must be based on RFC 2254. The entered names will replace % in the name filter.
tiptel VP 28 Configuration Using the Web Browser LDAP Number Filter Number filter. After you enter a number, the IP phone uses the number filter to search the LDAP server for the contact. The settings for the number filter must be based on RFC 2254. The entered numbers will replace % in the number filter.
tiptel VP 28 Configuration Using the Web Browser LDAP Number Attributes LDAP number attributes. The search result that the LDAP server sends to the IP phone must contain these number attributes. Examples are as follows: Mobile telephoneNumber ipPhone The search result that the LDAP server sends to the IP phone must contain the Mobile, telephoneNumber, and ipPhone attributes.
tiptel VP 28 Configuration Using the Web Browser Figure 6-19 Upgrade basic page Advanced setting On the Advanced tab page, you can configure the auto provision function, and export/import configure file and export the system log.
tiptel VP 28 Configuration Using the Web Browser Figure 6-20 Upgrade advanced page Table 6-15 Parameters on the Advanced tab page Parameter Description PNP Active Whether to enable or disable PNP. PNP(Plug and Play) provides a proprietary method to enable "Auto Provisioning". DHCP Active Whether to enable or disable DHCP. Custom Option(128~254) A valid Custom Option is from 128 to 254. The Custom Option Type must be in accordance with the one defined in the DHCP server.
tiptel VP 28 Configuration Using the Web Browser Power On Whether to enable or disable auto provision once the phone is power on. Repeatedly Whether to enable or disable auto provision with the interval configured. Interval(Minutes) Set the interval time. Weekly Whether to enable or disable auto provision in the configured period. Time Configure the period. Day of week Select the day in the week. Autoprovision Now Whether to upgrade at once.
tiptel VP 28 Configuration Using the Web Browser Trusted Certificates To upload a trusted certificate, proceed as follows: Step 1 Click Browse in the Trusted Certificates area and select a trusted certificate in the dialog box that is displayed. Step 2 Click Upload. Step 3 Choose enable or disable this function in the “Only Accept Trusted Certificates”. If Enabled is selected, the imported root certification is used to authenticate the signature in the server certificate.
tiptel VP 28 Configuration Using the Web Browser Figure 6-23 Server certificates Saving Settings Click the Submit button on the lower-part of a page after setting is completed.
IP Video Phone 7 Using tiptel VP 28 Using tiptel VP 28 Overview Call Type tiptel VP 28 supports audio and video calls. Audio calls: during the conversation, you can only hear the sound of the other party. Video calls: during the conversation, you can not only hear the sound of the other party, but you can also see each other. User can press to enable or disable the local video. Answer Mode tiptel VP 28 supports the following answer modes: handset, hands-free, and headset.
IP Video Phone Using tiptel VP 28 Redialing If you redial a number, tiptel VP 28 uses the account that is used to dial the same number the previous time. Step 1 Press key to enter into the Call History page. Step 2 Select a record and then press key again to send. Using the Call History to Make a Call tiptel VP 28 provides a key for users to obtain the call record list. To using the call record list to make a call, proceed as follows: Step 1 Enter into the Call History page.
IP Video Phone Using tiptel VP 28 Using Speed Dial to Make a Call You can assign the speed dial function to a DSS key. After the key is configured with a frequently used number or a complex number, you can directly press this key to make a call. For details, see DSS Key. Answering a Call Answering a Single Call In the standby mode, tiptel VP 28 receives an incoming call and starts ringing. To answer the call, pick up the handset, press the key or click .
IP Video Phone Using tiptel VP 28 Step 1 In the conversation with user B, user A clicks the key to hold user B's call. Step 2 User A dials user C's number. Step 3 User A performs call transfer. Blind transfer Click the key. User A is held, user B hears the RBT (Ring Back Tone), and user C's phone is ringing. After user C picks up the phone, user A hangs up the phone to complete the transfer.
IP Video Phone Using tiptel VP 28 The BLF function is disabled. And the DSS Key is green. The BLF function is enabled. And the DSS Key is green. If the listened-on account is not in the idle, the DSS key icon will change. Change the to . Table 7-2 Status on DSS Key menu Status Description The listened-on account is in the idle.
IP Video Phone 8 Maintaining tiptel VP 28 Maintaining tiptel VP 28 Restarting tiptel VP 28 Users can restart the phone via phone or web interface. Restart the phone via phone interface, please refer to “Reboot”. Restart the phone via web interface, please refer to “Basic setting” on the Upgrade page. Resetting tiptel VP 28 Users can reset the phone to factory setting via phone or web interface. Reset the phone via phone interface, please refer to “Reset to the factory”.
IP Video Phone Maintaining tiptel VP 28 To configure zero-sp-touch via web interface, please refer to “Advanced setting” on the Upgrade page. For more information about Zero-Sp-Touch, please consult your administrator. The manual is only for reference, please take the object as the standard. We reserve the right to improve or change the product and the user guide without notice.
IP Video Phone Maintaining tiptel VP 28 EG-verklaring van conformiteit volgens richtlijn 2004/108/EC Declaration of conformity according to regulation 2004/108/EC Hiermee wordt verklaard dat het volgende product Declares hereby for the following product tiptel VP 28 Voldoet aan de essentiële en andere relevante eisen volgens artikel 3 van de Europese Richtlijnen voor Radio en Telecommunicatie eindapparatuur (R&TTE Directive 1999/5/EC).
