Operation Manual

Base settings
60
Pause after unsuccessful sequence
You can set the duration (1-9 minutes), for which the telephone waits after an
unsuccessful sequence.
1. Press the MENU soft key to display the main menu items.
2. Press the arrow keys to choose BS Settings, then press the
SELECT soft key.
3. Enter the current base PIN and press the OK soft key.
4. Press the arrow keys to choose 8:Emergency Call, then press the
SELECT soft key.
5. Press the arrow keys to choose 4:Pause Time, then press
the SELECT soft key. The set pause duration is displayed.
6. Select the pause duration (1-9 minutes) using the arrow keys and
press the OK soft key.
7. Select further settings. Or press the
key to exit.
Duration of active connection
The Duration of active connection is the time, in which the emergency number is
dialed, the telephone called and the S.O.S. tone sequence played back. Example:
The telephones default setting is 90 seconds. The S.O.S. tone sequence is played
for this entire time (although it can only be heard when the call is accepted). If a
recipient answers the call after 60 seconds, he will hear the S.O.S. tone sequence
for a maximum of another 30 seconds. You can set a duration from 30  99 seconds.
Do not select too short a duration, so that the tone sequence will still be heard, if
there is a delay in the handset of the telephone called being lifted.
1. Press the MENU soft key to display the main menu items.
2. Press the arrow keys to choose BS Settings, then press the
SELECT soft key.
3. Enter the current base PIN and press the OK soft key.