Operation Manual

Base settings

5. Press the arrow keys to choose the barring memory location, and

press the SELECT soft key.

6. Press the arrow keys to choose ON (barring enabled) or OFF

(barring disabled), then press the SELECT soft key.

7. If you select ON, enter the number you want to restrict (up to four

digits) and then press the OK soft key.

8. To exit, press the

key.

If you want to edit a stored nummer, please overwrite it.

Changing flash time

During a conversation, the FLASH soft key allows you to access the special services

offered by the telephone network or transfer a call to another extension when you

are connected to a PABX (Private Automatic Branch of eXchange). For details,

see par. Flash signal on page 20.

The default setting is 100 msec. If your FLASH key does not work properly, you

need to adjust the Flash time as follows:

1. Press the MENU soft key to display the main menu items.

2. Press the arrow keys to choose BS Settings, then press the

SELECT soft key.

3. Enter the current base PIN and press the OK soft key.

4. Press the arrow keys to choose 5:Flash Time, then press the

SELECT soft key. The display shows the current setting with the

check symbol at the right end.

5. Press the arrow keys to choose the desired flash time, then

press the SELECT soft key. You can choose from 80, 100, 120, 180,

250, 300, 500 or 600 ms.

6. To exit, press the

key.