Operation Manual
Using menus
37
press 2 to select the Bell&Beep item). You will see the options
available for the selected item (in the example 1:Key Tone, 2: Ring
Type. 3: Ring Volume etc.)
3. Press the number key associated with the desired option item (for
example press 3 to select 3:Ring Volume)
4. Press the arrow keys to select the setting of your choice.
5. Press the SELECT soft key to save your selection.
Options with scrolling and quick access
Both with the scrolling and quick access, you have the following available
options:
To return to the previous menu level, press the CANCEL key
To return to the standby mode, press
or hold down the CANCEL soft
key.
Moreover, if you dont press any keys for about 30 seconds, the display will
automatically return to standby mode from any menu.
If you press the
key when a number is displayed, the phone will dial it.
List of menu functions
This list shows the menu structure available and indicates the number assigned to
each menu or option. For further details, please refer to the appropriate
paragraph/chapter stated inside brackets). D = Default telephone setting.
1. Phonebook
1: Search (page 29)
2: New Entry (page 26)
2. Bell & Beep
1: Key Tone (D: Type 1) (page 39)
2: Ring Type of handset (D: Type 1) (page 39)
3: Ring Volume of handset (D: Vol. 2) (page 40)
4: Alert Type (D: Ring) (page 42)