Operation Manual

Call lists

message asks if you really want to delete all the entries). Press the

OK soft key to confirm or CANCEL to exit without deleting the

entries).

4. To return to standby mode, press the

key.

Dialing a Call by Call number (network code number)

This feature lets you add special code numbers, which allows you to access diffe-

rent service providers you might be subscribed. This way allows you to get the

best fare depending on the type of call you are going to make (e.g. regional calls,

long distance calls etc.). You can recall the access number easily, and put it before

the phone number you want to call by entering the phone number manually or by

accessing the phonebook.

How to store Call by Call code numbers see paragraph .Storing Call by Call

numbers on page 49.

Dialing a Call by Call number manually:

1. Press the LIST soft key in standby mode,

2. Press the arrow keys to choose 4:Call by Call and press the

SELECT key to access the list. The display shows the currently

stored call by call numbers. The service providers names appear if

you have stored them, otherwise you will see only the code

numbers.

3. Press the arrow keys to choose the desired Call by Call number,

then press the SELECT soft key. The display shows Call to in the

top line and the code number in the second line.

4. Enter the phone number you want to call. It will be showed after the

selected Call by Call number.

5. Press the

key to dial the number.