Operation Manual

Call lists
28
Entering a name
1. To enter a specific alphanumeric character, press one or more times
the key labeled with the required character: once for the first
character, twice for the second and so on. The list of characters
available for each key is shown in the following table.
2. Select other letters in the same way. The cursor moves to the
right when you press a different key.
 When entering the same letter twice or a different letter on the same key,
wait for a few seconds for the cursor to move automatically, and then
select the next letter.
 To delete letters, use the CLEAR soft key.
 If you want to shift the case while entering letter, press the # key.
Example: to enter Ross, press:
 Three times the 7 key = R (the first character is automatically set
as capital).
 Three times the 6 key = o.
 Four times the 7 key = s (wait till the cursor moves to the right).
 Four times the 7 key = s.