Operation Manual
Basic functions
25
disconnects and the handset returns to standby mode. Check to see if the icon is
flashing on the display. If so, move the handset closer to the base.
If the radio coverage of your base is not sufficient for your purpose, you might
consider to buy an additional optional base and register your handset on it, obtaining
a small personal cordless network. For further details please see the par.
Registering a new handset and Selecting base.
Locking keys on handset
This function is useful to avoid unwanted function activations by accidentally
pressing any keys when you are carrying your handset. If you activate the key
lock, of the keys are inhibited, except for the
one.
In this condition, when a call comes in, you can answer the call by pressing any
key. When the call ends, the keys will be locked again.
To lock the keys, in the standby mode just keep the key
pressed
till the display shows KEY LOCK.
To unlock the keys keep the key
pressed again till the KEY LOCK
message disappears from the display.
Paging
You can page the handset from the base station making it ringing with a special
ring. Its useful to locate a lost handset or call the user who currently has the
handset.
To send the paging signal, press the Paging key
of the base. All
the phones which are registered with the base ring for 30 seconds.
To stop the paging signal before 30 seconds are passed, press the
Paging key
again or any keys on the handset(s).
If a call comes in while the handset is being paged, the handset stops the
paging operation and starts ringing normally in order to allow you to answer
the call.