Operation Manual
Basic functions
23
received calls (ref. par. Incoming calls) or inside the phonebook (ref. par.
Phonebook).
To enable/disable the fuzzy dial feature:
1. Press the MENU soft key.
2. Press the arrow keys to choose HS Settings, then press the
SELECT soft key.
3. Press the arrow keys to choose 2:Fuzzy Dial, then press the
SELECT soft key.
4. Press the arrow keys to choose ON (or OFF to disable it).
5. Press the SELECT soft key to save the setting.
6. Press the
key to return to standby mode.
To place a call using the fuzzy dial feature:
1. Be sure that fuzzy dialing is active and the phone in standby mode.
2. Enter, one by one, the first digit(s) of the phone number you want to
call. If they match with one or more numbers in the phonebook, or in
the lists of last incoming/outgoing, your phone prompts you to
complete the number with the digits left highlighting them.
3. If the prompted number is the one you want to call, go on with the
next step. Otherwise keep on entering other digits until you see the
desired number.
4. If the number is correct, press
to dial it (if not press to exit).
Obviously, if none of the prompted numbers match with the one you want to
call, it means that both you havent communicated recently with it and that
its not included in the phonebook. In this case just dial the number normally
and call it to automatically include it in the outgoing call list. Next time the