Operation Manual
Basic functions
18
1. Enter a telephone number. Check the number on the display.
Call to
2615042
2. If you have made mistakes (i.e. the number you dialed is not the
one you want to call) modify it as described in the below stated
notes.
3. When the number correctly appears, press the key
to dial it.
If you make a mistake while entering a number, press the CLEAR soft key
to clear the last digit and correct the number. You can also keep it
pressed for more than one second in order to clear all digits you have
entered and return to standby mode.
The EDIT soft key allows you to save the number you have dialed or
insert dialing pauses. See par. Storing a phone number in standby
mode and Entering a dialing pause respectively.
Receiving a call
When a call is received, the phone rings and the icon blinks on the display of
the handset. If the incoming call can be identified you will also see the callers
number in the display. If the callers number was proviously entered in the
phonebook, you will see his/her name instead of his/her number.
On base station, the key
is flashing.
1. To answer the call, press any key while the phone is ringing. When
you are on the phone, the display shows the call time.