Operation Manual
Setting up
14
Press the arrow keys to choose the desired language, and press the
OK soft key to confirm.
Turning handset on / off
When you place the handset on the base station, it automatically turns on.
1. To turn the handset on (when it is off), keep the key
pressed
until you switch the display on.
2. To turn the handset off, keep the key
pressed until the
goodbye message appears. Then the display turns off.
Nothing will appear on the display when the battery power is very low.
You should fully charge the handset before using it.
The first time the phone turns on, the display shows the handset and the
base number, e.g. HS(1) and BS(1). You can set the phone to display a
large analogue clock instead of the other parameters. For further details
please see the paragraph Setting standby Display
If you purchased an optional handset and didnt register the handset,
UNREGISTERED is displayed when the phone turns on. To register the
handset, see par. Registering a new handset.
Choosing the dial mode
In order to provide compatibility with other telephone systems, your phone can be
set to either pulse-dialing (rotary), or tone dialing (DTMF). Your phone is preset to
the tone dialing mode, anyway if you are not sure which dialing requires your
telephone network please contact your local service provider. To change the dialing
mode:
1. Press the MENU soft key.
2. Press the arrow keys to choose BS Settings, and press the
SELECT soft key.
3. Enter the base PIN (preset at the factory to 0000) and press the