Operation Manual

7
The telephone can be operated using a menu system that has been kept very
simple.
Fig. 3 Fig. 4
The function of the two display keys below the display is always shown in the
bottom line of the display. The right-hand Arrow key allows you to scroll
through the individual functions in the menu. Hold down the arrow key until
the function you want to set is shown in the top line of the display. In Fig. 3,
this is the phonebook. In the main menu list, this is Select 1 (first function in
the list). The ringing settings for the handset are Select 3 (see Fig. 4).
Pressing the Select key displays the relevant sub-menu for the function.
In the sub-menu you can once again make a selection using the same
method. Select the desired function from the list using the arrow key and then
press the Select key to display that function.
The menu overview (menu lists) can be found on Pages 67 / 68.
This symbol shows you the current setting of a function. For
example, if room monitoring is turned off, the symbol appears in
front of the word Off in the On/Off selection.
You can use the R key to switch between menu levels. This takes
place in fixed, sensible steps. You may have to press the R key
several times to return to the default display.
Description of the menu system
66
Appendix
CE mark
This device meets the requirements of the EU directive: 1999/5/EC directive
on radio systems and telecommunications equipment and the mutual
recognition of their conformity. Conformity with the above directive is
confirmed by the CE mark on the device.
Technical data
Standards: DECT = Digital Enhanced Cordless
Telecommunication
GAP = Generic Access Profile
The device is compatible with other manufacturers
DECT systems
Number of channels: 120 duplex channels
Transmitter frequency
range: 1880 MHz to 1900 MHz
Duplex method: Multiplex time division
Channel bandwidth: 1728 KHz
Bit rate: 1152 Kbit/s
Modulation: GFSK
Transmission performance:
10 mW, average performance per channel
Range: - up to 300 m outside
- up to 50 m inside
Power supply: Base station: 220/230V 50 Hz
Handset, base station: NiCd, size AA, 1,2 V, 700
mAh
Power consumption: approx. 7 Watt
Operating time: Standby: up to 100 hours (with 700 mAh batteries)
Talk time: up to 10 hours (with 700 mAh batteries)
Dimensions (LxBxH): Base station: approx 124,5 x 197,5 x 76,0 mm
Handset: approx 173,0 x 62,5 x 35,2 mm
Weight: Base station: approx. 305 g (without batteries)
Handset: approx. 168 g (without batteries
Downloaded from www.Manualslib.com manuals search engine