Operation Manual

25
Convenient calling
Character table
Press the appropriate key several times or hold it down:
Upper and lower case:
The first letter entered always appears in upper case. Subsequent letters
appear in lower case up to a word space (space = 0 key). The first letter after
a word space once again appears in upper case.
The case can be changed for any letter by pressing the R key immediately
after entering the letter. The setting made in this way is retained for subse-
quent letters until it is reversed.
Deleting characters:
The character to the left of the cursor is
deleted.
1x 2x 3x 4X 5x 6x 7x 8x 9x 10x 11x 12x 13x
1
abc2äàáç
def 3èéê
ghi 4î
jkl5
mno6öòóô
pqr s7ß
t uv8üùúû
wxyz9ý
0
*#()/.,!?´-_@
Setting system functions
48
Dialling restrictions
Function overview
You can set two types of Dialling restrictions on your telephone:
Baby call (direct call): A stored call number can be dialled by pressing any
key (with the exception of the loudspeaker, emergency key, intercom and R
keys and the speed dialling keys of the base station).
Full restriction: Essentially, no call numbers can be dialled. Exceptions: the
numbers stored for police and fire brigade and the stored emergency
numbers if the emergency call function is turned on.
Baby call can only be activated if the baby call number has previously been
programmed.
Storing the baby call number
MENU Press the Menu key.
Choose Select 6 using the arrow key.
Select 6 System Set Press the Select 6 key.
Enter PIN Enter the 4-digit PIN.
OK Press the OK key.
Choose Select 5 using the arrow key.
Select 5 Baby Call No Press the Select 5 key.
e.g. 01234 Enter the call number.
OK Press the OK key.
Select further settings. Or...
Press the R key to leave that menu level.
Downloaded from www.Manualslib.com manuals search engine