Installation Instructions

The configuration wizard

Start the web configuration by entering the identified IP address of the telephone sys-

tem in the address bar of your web browser followed by /wizard/ e.g.

192.168.34.100/wizard/. As username and password enter admin each.

The configuration wizard allows you making the basic settings of the most important

data, i.e. distribution of external calls to the extensions as well as the assignment of

the extension's telephone numbers to the numbers sent with outgoing calls (im-

portant with e.g. charging). In order to do so it uses fixed extension numbers being

fixed assigned to the corresponding ports.

The telephone numbers 50 - 57 are fixed for the analogue extensions 1 - 8. For the

internal S

2 the numbers 20 and 21, for the internal S

3 the numbers 30 and 31 and

for the internal S

4 the numbers 40 and 41 are fixed.

The configuration wizard can also be used after changing these fixed telephone

numbers (of course this is possible in the normal configuration. It will then also show

you the modified telephone numbers. But please observe warning messages in this

context.

The wizard detects whether the S

ports are set to external or internal.

Country setting

In order to comply with country specific settings you must select the required coun-

try.