Technical data

Settings
94
Queue message ..................... Here you can stipulate one of the 14 individual
OGMs as the queue message. This OGM is then
repeated continuously for the "Hold a call" function.
Own number
Own number .............. If you enter your own call number your tiptel 570 SD
announces this call number for internal OGM texts.
Remote control ...................... >>
Access code ............... The access code is a 1 to 4 digit number between 0
and 9999. Remote control is switched off using the "
– " code.
Quick check code ...... If you want to access the remote control quickly
without having to enter the access code you can for
example enter your mobile phone call number here.
If this call number is detected for a call the device
starts remote control immediately.
Toll-saving .................. Yes or no. If you select "Yes" and there are new
ICMs your tiptel 570 SD answers calls after two
ringing tones (no matter the number of ringing
tones set). If there are no new ICMs the device only
answers the calls after the number of ringing tones
set in the "Ringing tones" option. So before
accepting the call you already know whether there
are new ICMs and whether remote control is
worthwhile.
Remote on/off ............ Yes or no. You set whether the answering mode
should be activated remotely or not.
Remote deletion ......... Yes or no. You can set here whether the "Delete
ICMs remotely" option is activated or not.
Monitoring .................. Yes or no. You set whether the "room monitoring"
should be activated or not.
Message code ....................... The message code is a 1 to 4 digit number between
0 and 9999. The message function is switched off
using the " – " code.
Repeat ................................... Every 5 to 60 seconds. You can set the pause
between the dialling attempts for automatic
redialling here.