Technical data

Alarm dialler

The selection is activated by closing an external, potential contact. The contact

must be closed for at least one second. The answering machine then dials the

saved call numbers in sequence. If the subscriber called picks up he will hear the

following outgoing message:

"Automatic alarm, please confirm, I repeat …" or if you have entered your own call

number as identification "automatic alarm from subscriber (own call number),

please confirm, I repeat".

It is possible to confirm the alarm by entering the confirmation code during the

message. Proceed as described in "Carry out remote control" (Page 45) (*Code#).

If the alarm is not confirmed the device dials the next call number after a waiting

period (5 - 180 seconds). If no confirmation is made during the repeat time (5 – 60

minutes) the device dials the complete call number sequence again as a reminder.

If the alarm is not quit your tiptel 570 SD makes no, one or two repetitions

depending on the setting you have chosen.

Setting options for alarm dialler

Quit code ................................ The quit code is 1 to 4 digit number between 0 and

9999.

Waiting period ...................... 5 to 180 sec. This is the time from hanging up to

dialling the next call number.

Repeat period ....................... 5 to 60 minutes. This is the time that passes before

all call numbers are called again.

Repetitions ............................ 1, 2 or no repetitions

Playbacks .............................. 1 – 8 times. You can set here how often to replay

the alarm message.

1. Call number ....................... >>

2. Call number ....................... >>

3. Call number ....................... >>

4. Call number ....................... >>