Technical data

Message transfer
66
When entering the call numbers
press the selection button next to
"Call number" and make the desired
settings using the control buttons
(up/down).
The entry location flashes.
Digits and special symbols are displayed.
The special symbols have the following
meanings:
~ = Wait for dial tone / 3 Sec. pause
i = Internal (for PABX)
F = Flash (short, for PABX)
H = Hook flash (long, for PABX)
S = Send by SMS
Press control button (right) to
change to the next entry location
and enter other digits.
The cursor to the next entry location.
Use the control button (left) to
move the cursor once place
backwards, for example to
overwrite a character.
The cursor moves to the left.
To transfer a call number from the
t
elephone book press the selection
button next to the "Insert" symbol.
The call number is entered to the left of
t
he cursor.

Search and select names as
described under "Search entries".
The name is displayed below the call
number.
To enter a character press
secondary function and then control
button (down).
An empty space is inserted to the left of
t
he cursor.
To delete a digit, move the cursor to
t
he location and press the selection
button next to the delete symbol.
The character under the cursor is
deleted.