Technical data

Message transfer

For message transfer the answering machine dials the saved call numbers

consecutively after each new incoming message. If the subscriber called picks up

he will hear the following outgoing message:

"Automatic call, ..x.. incoming messages, please collect remotely, I repeat …" or if

you have entered your own call number as identification "automatic call from

subscriber (own call number), ..x.. incoming messages, please collect remotely, I

repeat".

It is possible to start remote control for the recorded message(s) during the

message. Proceed as described in "Carry out remote control" (*Code#). If you do

not access the messages remotely the device dials the next call number after a

waiting period (5 - 180 seconds). If no remote control is carried out during the

repeat time (5 – 60 minutes) the device dials the complete call number sequence

again as a reminder. If there is no remote control your tiptel 570 SD makes no, one

or two repetitions depending on the setting you have chosen.

Setting options for message transfer

Waiting period ...................... 5 to 180 sec. This is the time from hanging up to

dialling the next call number.

Repeat period ....................... 5 to 60 minutes. This is the time that passes before

all call numbers are called again.

Repetitions ............................ 1, 2 or no repetitions

Playbacks .............................. 1 – 8 times. You can set here how often to replay

the forwarding message.

1. Call number ....................... >>

2. Call number ....................... >>

3. Call number ....................... >>

4. Call number ....................... >>